Plumbing Help: How to Avoid Burns When Setting Your Water Temperature

Sometimes it seems like your shower or sinks are too hot, or not hot enough.

But raising the temperature valve on your water heater can be dangerous or a waste of energy. If there are children, elderly, or disabled persons in your household, for example, you might not want to set the thermostat above 120 degrees Fahrenheit to avoid contact with "hot" water.

The following chart may help you determine the right temperature for your water heater. According to Shriners Burn Institute:

- Water set to 125 degrees generally takes about 1.5 to 2 minutes to scald.
- Water set to 130 degrees generally takes about 30 seconds to scald.
- Water set to 135 degrees generally takes about 10 seconds to scald.
- Water set to 140 degrees generally takes about 5 seconds to scald.
- Water set to 145 degrees generally takes about 3 seconds to scald.
- Water set to 150 degrees generally takes about 1.5 seconds to scald.
- Water set to 155 degrees generally takes about 1 second to scald.

So you can see how small increases in temperature can have a large effect on scald times.

People are often concerned about raising the temperature on their water valves due to a bacteria known as Legionella (and the disease known as Legionella's disease) that thrives in water at a temperature of 105 to 115 degrees.

Since this bacteria cannot survive above a temperature of 131 degrees people often look to exceed that temperature despite the risk of scalds.

Fortunately, the solution is a simple one. A device known as a water mixer allows your water to be heated to a point that will kill off all harmful bacteria, but sets a different max temperature to water being distributed to your tap water in sinks and showers.

A plumber can install this device for you quickly and without great expense!

Donald Koen is a master plumber and owner of Koen Plumbing, a Dallas Plumbing Company since 1946. If you're looking for a Dallas Plumber, Donald can offer expert assistance through his website http://www.KoenPlumbing.com

You Can Do It Yourself! Tackling Diy Bathroom Plumbing

Do it yourself. A generational catch phrase born from the crop of reality-based television programming that has captured an audience with extravagant remodels accomplished over a weekend and elaborate decorating on a budget. Do it yourself ? or DIY - always existed as concept ? budget-conscious homeowners pulling up their sleeves to tackle a project armed with tools and the ability to think on their feet. But the phrase do it yourself has produced a whole new harvest of weekend warriors filled with newfound confidence and eager to experience the self-satisfaction of a job well done.

Nothing seems to urge on do-it-yourselfers like a DIY bathroom plumbing project. The evidence lays in the community of homeowners who have dug in their heels, refusing to shell out hard earned dollars to a plumber simply to rectify a leaky faucet. The DIY bathroom plumbing project runs the gamut from drippy faucets and running commodes to noisy nozzles and flooding floors. But even more diverse are the extended projects that result from this initial foray into DIY-land. Suddenly, a DIY bathroom plumbing project becomes a full-blown remodel ? vanities replaced; showers re-tiled; original floors swapped for their newer counterparts.

For those who have strapped on their tool belt and begun their journey into their DIY bathroom plumbing project, there are a few things to keep in mind. First and foremost, it is imperative that before beginning any repairs of sinks, toilets, and showers to turn off the water to that location. Nothing ends a DIY bathroom plumbing project quicker than a surprise flood. Further, any project involving electricity should be handled with extreme caution. Just as you turned off the water ? turn off the electric power in the bathroom before tackling any projects.

Secondly, be sure that you have the appropriate parts to complete the DIY bathroom plumbing project. Parts that don?t fit will elongate the project and can easily end with disastrous results.

Finally, do your homework. Be sure to research the DIY bathroom plumbing project prior to starting. The Internet can be an enormous source of information as can your local home improvement store. And remember, you may be doing it yourself, but that doesn?t mean you can?t call in a professional if you get in over your head. Sometimes a pro can actually wind up saving you money in the end.

If you are well-researched, organized, and on your toes, your DIY bathroom plumbing project can pay dividends. Not only will you have the bathroom you want, but you?ll have the unrivalled satisfaction of knowing you did it yourself.

For easy to understand, in depth information about plumbing visit our ezGuide 2 Plumbing.

You Can Do It Yourself! Tackling Diy Bathroom Plumbing

Do it yourself. A generational catch phrase born from the crop of reality-based television programming that has captured an audience with extravagant remodels accomplished over a weekend and elaborate decorating on a budget. Do it yourself ? or DIY - always existed as concept ? budget-conscious homeowners pulling up their sleeves to tackle a project armed with tools and the ability to think on their feet. But the phrase do it yourself has produced a whole new harvest of weekend warriors filled with newfound confidence and eager to experience the self-satisfaction of a job well done.

Nothing seems to urge on do-it-yourselfers like a DIY bathroom plumbing project. The evidence lays in the community of homeowners who have dug in their heels, refusing to shell out hard earned dollars to a plumber simply to rectify a leaky faucet. The DIY bathroom plumbing project runs the gamut from drippy faucets and running commodes to noisy nozzles and flooding floors. But even more diverse are the extended projects that result from this initial foray into DIY-land. Suddenly, a DIY bathroom plumbing project becomes a full-blown remodel ? vanities replaced; showers re-tiled; original floors swapped for their newer counterparts.

For those who have strapped on their tool belt and begun their journey into their DIY bathroom plumbing project, there are a few things to keep in mind. First and foremost, it is imperative that before beginning any repairs of sinks, toilets, and showers to turn off the water to that location. Nothing ends a DIY bathroom plumbing project quicker than a surprise flood. Further, any project involving electricity should be handled with extreme caution. Just as you turned off the water ? turn off the electric power in the bathroom before tackling any projects.

Secondly, be sure that you have the appropriate parts to complete the DIY bathroom plumbing project. Parts that don?t fit will elongate the project and can easily end with disastrous results.

Finally, do your homework. Be sure to research the DIY bathroom plumbing project prior to starting. The Internet can be an enormous source of information as can your local home improvement store. And remember, you may be doing it yourself, but that doesn?t mean you can?t call in a professional if you get in over your head. Sometimes a pro can actually wind up saving you money in the end.

If you are well-researched, organized, and on your toes, your DIY bathroom plumbing project can pay dividends. Not only will you have the bathroom you want, but you?ll have the unrivalled satisfaction of knowing you did it yourself.

For easy to understand, in depth information about plumbing visit our ezGuide 2 Plumbing.