Great Reasons You Might Need Plumbing Consulting

Plumbing consultants are the people that will come out and give you plumbing consulting, and tell you what your plumbing problems are. Not only are they problem solvers in the plumbing area, they can do so many things for you where your plumbing concerned. There are many reasons why you might need to hire a consultant, and they are all listed below.

1. Building a New Home

If you are building a new home, you are going to need a plumbing consulting. Having a consultant come out to the site, and tell you what you need to do, or which direction you should take your plumbing, will be the best thing that you can do. This way you hear from a professional, the right way to do the plumbing. You should have this done wether you are doing the plumbing yourself, or hiring a plumber to get the job done.

2. Remodeling a Home

Anyone that is remodeling their bathroom or kitchen will need to hire a plumbing consulting. This consultant will be able to let the home owner know the beat way to get the job done, and if the remodel will be possible. It is best if you call your consultant before you start the job, and you will see that this will save you time and money in the long run. This is in case you have already done something to the remodel that the consultant advises against. You will not have to go back and redo anything that you have already done. Be sure that you call the consultant first.

3. Leaks

Do you have pipes leaking under your home that you can not fix, and make them stop leaking? If so, it is time to call a plumbing consulting. This consultant will be able to come to your home, and tell you the best way to get your pipes fixed, and keep them from leaking. You will not have to worry about leaky pipes, and puddles under your home any longer when you fix your plumbing the way the consultant tells you to.

4. Plumbing

If you need to have your plumbing done, and do not want to tackle this yourself, calling a plumbing consulting will be your best bet. They can come out, and do the job themselves, or hire someone to get it done for you. Of course, you will have to pay for the job to be done, as well as the consulting in the long run. However, to keep from having to crawl under the house, this may be worth it to you, and to have it done rather than your having to deal with it yourself.

5. Installations

Having bathtubs, or sinks installed into your home might call for a plumbing consulting to come out and make sure that the job is going to go smoothly. You will need to be sure that you find one that is knowledgeable in what you are having done to your home, and make sure that they know the best way for the plumbing and installations to be handled as well. A reputable consultant should be able to help you with this.

As you can see, there are many reasons you might need a plumbing consulting. They are more than just a plumber, and will get your job done for you in the event you do not want to mess with it yourself. You will see that they can be found in your local telephone book, and you not regret giving one a call if you are in need of plumbing assistance.

Carl has been a professional plumber in a company he owns for more than 10 years not only is he experience in unclogging just about anything but also an expert in installing plumbing fixtures and installing new water lines. Carl will give you some helpful tips on plumbing installation when you visit http://www.alliedesolutions.com

Plumbing Design: Why it is Important

Your plumbing design for your home is very important. You need to be sure that everything is connected properly, and is going to the right place. What happens when you do not have a good design is something you will not want to experience. If you are building a new home, be sure that you hire a professional that will make sure that all of this is taken care of and you will not have to worry about it. The plumbing professional will ensure that all is connected, tightly, and you will have the plumbing that you need for the most efficient use of your water as well.

When you have a poor plumbing design, you might be experiencing things such as the kitchen sink gurgling when your washing machine drains, your toilet and bath tub might even be backing up as well. This is something you will not want to experience, not only will you have to call your plumber, you will have a mess to clean up that might be rather large. To prevent all of this, you need to make sure that your design is one that will work from the beginning. You will not want to get your house built to later find out that you have these problems because of the design, then it will be too late to change it and do anything about it.

When you hire a plumber to take care of your pluming design, make sure that you get a professional that has a great reputation for doing his job. When you do this, you can be sure that you will get the best design possible for your home, and the plumber will do a good job with what he has to work with. Talk to your plumber as well, and cover all of your options. If you do not know what your plumber is talking about when he is talking about the plumbing, ask him to show you. You want to understand how your plumbing is set up in case you ever decide to remodel, you will know what is going on.

Taking care in who you hire to do your plumbing will have a huge effect on your plumbing design. Do not just hire anyone to do this job, and if you do not know what you are doing, you should not be doing it yourself. You will be glad that you let a professional take care of this and did not tackle the job yourself when you have no idea what you are doing. Any professional plumber that is good at what they do should be able to give you a good design. Make sure that you check references before you just hire anyone, and you will be happy that you checked them out first.

Carl has been a professional plumber in a company he owns for more than 10 years not only is he experience in unclogging just about anything but also an expert in installing plumbing fixtures and installing new water lines. Carl will give you some helpful tips on plumbing installation when you visit http://www.alliedesolutions.com

Plumbing Basics – Installing a Bathtub

Installing a bathtub isn't exactly rocket science, but it does require solid plumbing, carpentry, and sometimes, tiling skills. Replacing an old bathtub with a new one is also a moderately difficult project. If the old tub is readily accessible, the project can move speedily; if you have to open a wall to remove the old tub and position the new bathtub, the task is much harder. In either case, the project is within a home handyman's skills, although you will need a helper to move out the old tub and set in the new one. Make sure you have qualified yourself for the job and are comfortable attempting it. Rather than hiring a contractor to take over a halfway-completed project, it is better to consider employing one before you begin. Chances are you may need a professional plumber to make tube connections.

This article will help you install a new bathtub in your bathroom if you have already bought a new tub and don’t need to change the arrangement of your previous water supply pipes.

Your tools and material checklist should comprise the following:

New Bathtub
Hammer
Pipe Wrenches
Prybar
Safety Glasses
Level
Pliers
Adjustable Wrench
Putty Knife
Screwdriver
Cold Chisel
Tape Measure
Pipe Caps
 

Preparing for the Installation

Firstly, the supporting frame supplied with the bath should be fitted (if required) according to the manufacturer’s instructions.

Next, fit the taps or mixer to the bathtub. When fitting the tap block, it is important to make sure that if the tap comes with a plastic washer, it is fitted between the bath and the taps. On a plastic bath, it is also sensible to fit a supporting plate under the taps unit to prevent strain on the bathtub.

Fit the flexible tap connectors to the bottom of the two taps using 2 nuts and olives (sometimes supplied with the tub).

Fit the plug-hole outlet by smearing mastic filler round the sink outlet hole, and then pass the outlet through the hole in the bath. Use the nut supplied by the manufacturer to fit the plug-hole. Examine the plug-hole outlet for an inlet on the side for the overflow pipe.

Next, fit the end of the flexible overflow pipe to the overflow outlet. After that, screw the pipe to the overflow face which should be fitted inside the bath. Make sure you use all of the supplied washers.

Connect the trap to the bottom of the waste outlet on the bathtub by winding the thread of the waste outlet with silicone mastic or PTFE tape, and screw on the trap to the outlet. Connect the bottom of the overflow tube in a similar manner.

The bath should now be ready to be fitted in its final position.

Removing Old Taps

If you need to replace old taps with new ones as a part of your installation, then the first thing you should do is disconnect the water supply. After doing so, turn on the taps to drain any water remaining in the system. The process of removing the existing taps can be quite problematic due to the restricted access that is often the case.

Use a basin wrench (crowsfoot spanner) or a tap tool to undo the nut that connects the supply pipes to the taps. Have a cloth ready for the remaining water that will come from the pipes. Once the supply pipes have been removed, use the same tool to loosen the nut that holds the taps onto the bath/basin. You will need to stop the single taps from turning during this process. Once the taps have been removed, the holes in the bath/basin will have to be cleaned of any old sealing compound.

Before moving on to fit the new taps, compare the pipe connections on the old taps to the new taps. If the old taps are longer than the new taps, then a shank adapter is required for the new taps to fit.

Installing the Bathtub

Using the two wooden boards under its feet, place the bathtub in the required position. The wooden boards are helpful in evenly spreading the weight of the bathtub over the area of the boards instead of focusing all the weight onto four small points.

The next goal is to ensure that the bathtub is leveled all round. This can be achieved by checking the spirit level and adjusting the feet on the bathtub until the spirit level reads level.

To install taps, fit the bottom of the furthest flexible tap connector to the appropriate supply pipe by making a compression join; then do the same for the other tap.

Switch on the water supply and check all joints and new pipework for leaks and tighten them if necessary. Fill the bathtub and also check the overflow outlet and the normal outlet for leaks.

Finally, fix the bath paneling as described in the manufacturer’s instruction manual.

Tiling and sealing around the bathtub should wait until the bathtub has been used at least once as this will settle it into its final position.

Fitting New Taps

If the tails of the new taps are plastic, then you will need a plastic connector to prevent damage to the thread. One end of the connector fits on the plastic tail of the tap and the other end provides a connection to the existent supply pipes.

If you need to fit a monobloc, then you will require reducing couplers, which connects the 10mm pipe of the monobloc to the standard 15mm supply pipe.

Next, position the tap in the mounting hole in the bath/basin ensuring that the washers are in place between the tap and the sink. Secure the tap in place with the manufacturer provided backnut. Once the tap is securely in place, the supply pipes can be connected to the tails of the taps. The taps can either be connected by using corrugated copper piping or with normal tap connectors. The former type should be connected to the tap ends first, tightening only by hand. The supply pipes can later be connected to the other end. Tighten both ends with a spanner after both ends have been connected.

Tiling Around the Bathtub

In the area where the bath meets the tile, it is necessary to seal the joins with a silicone rubber caulking. This is important as the fitting can move enough to crack a rigid seal, causing the water to penetrate the wall between the bath and the tiling, leading to complications with dampness and possible leaks to the ceiling below.

You can choose from a variety of coloured sealants to blend in your fixtures and fittings. They are sold in tubes and cartridges, and are capable of sealing gaps up to a width of 3mm (1/8 inch). If you have a larger gap to fill, you can fill it with twists of soaked newspaper or soft rope. Remember to always fill the bathtub with water before sealing, to allow for the movement experienced when the tub is in use. The sealant can crack fairly early if you do not take into account this movement before sealing.

Alternatively, ceramic coving or quadrant tiles can be used to edge the bath or shower tray. Plastic strips of coving, which are easy to use and cut to size, are also easily available on the market. It is advisable to fit the tiles using water-resistant or waterproof adhesive and grout.

Ray Dobson is the managing Director of WD Bathrooms based in Sheffield. For a wide range of bathroom supplies visit http://www.wdbathrooms.co.uk/acatalog/Bathroom_Suites.html or alternatively for our full range of products and more useful articles visit http://www.wdbathrooms.co.uk

Plumbing - U-Trap Pipe Replacement

A few weeks ago, our family noticed water coming out of the cabinets around the kitchen and bathroom sinks. With a little inspection, we discovered the same problem in each case was at fault. The U-trap pipe was leaking due to being worn out from years of use. The pipe as its name suggests is U-shaped.

The importance of the U-trap other than keeping your floor dry and getting rid of water is that because some water is in the bottom of the pipe at all times, this helps prevent sewer gases from entering your home and harming you or your loved ones.

After diagnosing the problem, the next step is to go to the hardware store and get a replacement. Other than a flashlight (no matches or open fire source!), you will need a pipe wrench(only if you can't use your fingers to remove the nuts holding the pipe) and replacement pipe (either metal or PVC). You should check the pipe to see if you can remove it without a wrench, thus saving you some money if you don't need one, providing there is not one in the toolkit already. A word about pipe wrenches: You know that number they give such as 18"? That refers to the handle length AND the full opened width of the wrench jaws. Confusing, huh? Just be sure you pay for what you need.

After getting what you need from the store, unscrew the collars or nuts around the pipe, gently move it a bit to see if it moves, then pull out of position, and insert the new pipe and appropriate hardware. See that it is secure. Turn on the water. Check for leaks. If you have anymore problems with leaks from the same source, recheck all pipe connections for the U-pipe and P-pipe. The P-pipe is the one that leads from the U-trap pipe into the wallpipe connection, which, as the name suggests is the pipe leading into the wall and from there the sewer.

C. O. IRBY, III
bingle42@yahoo.com
I learned home improvement by doing it myself, but since I'm still learning I would be glad to hear from you any tips you have. I live in a 50+ year old house.

Who's Plundering your Plumbing Business?

If you occasionally feel that you are working for nothing, chances are that you are.

How many times have you put your invoice in for payment only to have to wait for 30 days for your money? If this is happening to you and your business, chances are that your business is being plundered by pillagers.

Pillagers are those people who sneak around thieving from you. They seem to have an instinctive nose for any Plumbing contractor in business who is not minding his business.

By not minding his business, I am referring to any plumbing business that is lax-a-daisical about his accounting procedures and following-up on over-due invoices. Every time you have an over-due account, it means you are paying for that client’s job. So the question is, are you a Plumbing business or a financial services business?

It is the function of financial institutions to lend money, not a Plumbing Contractors. Any Plumber in business today has to be a good business person first. Why? Because no matter how good a Plumber you are, if you aren’t being paid at job completion you soon won’t have your own Plumbing business to grow into a business.

Business is about profits. Building profit into each job to grow a business from your Plumbing activities. Plumbing is how you make the money to grow your business.

In today’s technological world there is no excuse for not being paid at job completion every time. There is no excuse except excuses for being a bad business operator.

With the information highway that the Internet provides, there is training and information products readily available for learning any aspect of operating a Plumbing business you may need assistance with. There is no shame in acknowledging you need information. Besides, no-one even needs to know that you are learning via the internet anyway, but if you feel your business could be run better, then you would be a poor business operator if you didn’t seek out the information.

You didn’t ‘just become a Plumber’ did you? You studied hard and ‘did your time’ learning. What makes you so sure then that you can run a successful Plumbing business without learning? Just because you are an excellent Plumber does not necessarily equate that you are therefore a good business operator.

All new skills have to be learnt from the bottom up. Building a business is no different.

Treat your business like a job site. Plan it out, lay it out on paper, understand why you have to dig the ditch to the required depth before you lay the pipe – by understanding why things have to be done in your Plumbing business allows you to plan ahead. Once you have this planning done, you can then see what needs to be done to achieve the desired outcome.

Because you have a plan for your business you will be able to quickly see who or what is plundering your business and stop it before it becomes too late.

Pillaging is still a crime so make sure you aren’t the one responsible for plundering your own Plumbing business.

http://www.constructingprofits.com Showing contractors how to make more money ~ working less hours!

DIY Plumbing & Is It Advisable For Your Home

When it comes to DIY plumbing, everyone knows the basics. We all know how to unclog a toilet or clean out a drain pipe, but what if the problem is a little more complex? Most homeowners can handle the minor DIY plumbing projects, such as the aforementioned scenarios. But, what happens if those harsh drain cleaners are a worry to have sitting around the house or you worry about breathing with their strong smell in the air? Below are a few tips to some very simple DIY plumbing projects, which are followed by information on how to know when to hang up your hat and call a professional.

If you have children or pets in the house, harsh drain cleaners may not be the best products to have in your cabinet. Instead, using a new toilet plunger to unclog those stubborn drains is one of the best kept DIY plumbing secrets in existence. This process works perfectly on a single sink, but gets a little more tricky with double sinks. In the latter situation, you will need someone else to help you and you will need a total of two plungers. Your friend should use one plunger to secure the air from exiting out of the properly working side while you plunge on the sink that is clogged. Depending on the severity of the clog, this may take a few minutes and some strength in using the plunger, but it’s much safer than using harsh drain cleaners. When plunging a sink, you must take special care to not push so hard that you damage the sink. At the same time, you have to use enough force to unclog the drain. When using this DIY plumbing method, always use a new plunger.

If you are experiencing problems with your toilet, always turn the water off using the knob at the base before proceeding to work with the repair. This will prevent any overflowing or other situation that may hinder your repair efforts.

If water finds it’s way to the floor of your bathroom, a quick cleanup may make the difference in moisture that eventually leads to a weakened floor or not having any permanent damage. The best way to clean water out of your carpet is by using thick towels to soak up the moisture. Never leave water to dry on it’s own as this will almost certainly lead to rotting of the floor, which will eventually cause the structure of your floor to weaken.

When it comes to knowing whether or not to work on a DIY plumbing project or call a professional, it’s best to gauge a number of factors. Among them, your level of experience in repairing similar problems, the time that you have to dedicate to the project and your level of patience. Plumbing can be stressful, especially when it relates to your own home. If you are not comfortable in completing the project correctly or have complete confidence that you can repair a leak without further problems, it’s best to call a professional. The same is true if you do not have the time needed to correctly make DIY plumbing repairs or the patience needed to make them. Plumbing, like electricity, is essential for your home and family. When it comes to these, nothing but the best will do.

Find all types of home improvement contractors who specialize at installing carpet, doors, siding, roofing and much more. If you are a home improvement contractor or an author of home improvement articles, add your site or articles today.

Never Rely on Your Plumbing Expectations

We in the 21st Century living in a developed Country are totally, totally spoiled. Just ask anyone who lives in a developing Country.

Better still; try living in one yourself for some time rather than just passing through as a tourist living in 5 star luxuries.

It was 20 years ago that I lived in Malaysia for 3 years. I loved living in Georgetown on Penang Island. The people were beautiful, the scenery breathtaking and the food from the Mukan stall’s delicious and cheap.

Some of the backstreets though where the poorer people lived and survived were not always so delectable or pleasant. The open “Mony drains” were either so deep you would think they were dug out by a miner, or so shallow they were virtually useless. Mony drains were short for monsoon drains due to the tropical downpours that came through every 3 months as the monsoon passed over on its way south then on its way north again.

Now this is where I really appreciated plumbing. We, of course, being among the blessed elite, had ‘normal’ plumbing in our house with running water.

The difference was that this water was released into our outside “mony drain” that ran around our house and into a larger drain which ran into a larger drain etc until it ran out to where ever was the great meeting place for all mony drains.

Every week our wonderful, cheerful gardener came with his tin of ‘goodies’, hard scrubbing brush and scrubbed our drains for us.

There was one outside tap for use in the garden and it was located at the front of our house. On this tap we had a long hose that reached around the back of our house. Yes, you’re right, Nothing unusual about that.

We lived in a cul-de-sac with 3 houses. The last house had a really beautiful garden with a very attractive spirit house out the back. If I had been an ancestor, I would have been honoured to have lived there but I was a neighbour instead.

But as neighbours, we had a problem that went beyond different languages.

Their gardener raked the leaves off their perfect lawn and burned them in front of our house. Often long after our Amah Devi had put the washing on the line to dry.

Because it ‘got smoked,’ she used to bring it in and re-do it, which really wasn’t remotely fair.

We asked nicely, we asked again, and again and again. We spoke with the owner of the house, his wife, the mother-in-law grandmother, the gardener many, many times. We even had a solicitor write a letter to them in Bahasa requesting that they stop causing us this problem.

But they continued to light the fire to burn the leaves directly out the front of our house.

This particular day I came back from walking the kids to the school bus and they were out the front about to light the fire again. I approached them and asked them not to and pointed to the washing hanging on our line. It was the grandmother and the gardener and she was telling the gardener to ignore me and light the fire. He continued to hesitate because he was a kind hearted man and knew he was causing extra work for Devi.

I pointed to the tap in front of our house and went and got the hose. I turned the tap on full-bore, kinked the hose to hold the water back and hauled it through the front gate to where the fire was now burning.

I unkinked the hose expecting to see the usual gush of water sprout forth and it went drip…drip…drip…

I couldn’t help myself. I burst out laughing and laughing and the grandmother joined in. The gardener didn’t quite know what to do but his grin said it all.

The grandmother came over and gave me a kindly pat on the arm, told the gardener to put the fire out and whatever else she said but we never had a fire lit there again.

Now that was probably the only time in my life I have been grateful for bad plumbing. jan@constructingprofits.com http://www.constructingprofits.com Showing contractors how to make more money ~ working fewer hours

Planning Your Plumbing Projects Carefully Before Starting

If you are planning to take on a home improvement project, the plumbing involved is probably something that is causing you to worry. Whenever you make major alterations to a property plumbing is usually involved and needs to be done properly. It is easy to gloss over the importance of plumbing in your home improvement projects, making sure it is done well can save you time, money and stress in the long run.

You should consider where plumbing will be involved in your project before you start and make sure you plan for it in advance. Usually home improvements that involve a kitchen or bathroom will involve a degree of plumbing work. Depending on the scope you may feel capable of tackling the project yourself, or you may want to play it safe and employ a professional. You should get a quote and ensure your plumber is available before you begin your project.

Plumbing is an area that most homeowners are not shy about admitting they don’t have a clue about. Many avoid the issue, being happy to pay someone else to tackle the problem for them, but there is actually a surprising amount the homeowner can do for themselves. There are whole range of books and websites available with diagrams and detailed instructions to guide you through simple or even fairly complicated plumbing tasks. The types of tasks that can easily be undertaken using an online plumbing guide or handbook include installing a new faucet or drain tap. If you want to replace long lengths of pipe, on the other hand, you may be best to find someone with plumbing experience. Perhaps you have a friend who would be willing to help out which will reduce the overall cost of your home improvement project.

Producing a detailed plan with timelines for your project and the plumbing activities involved, will help you to identify what you can do yourself and what you need to involve a professional to help out with. Your time line will be a good way to keep track of what needs to be done, how it will be done, and by whom.

Plumbing activities can involve anything from replacing a faucet to installing new pipes and most tasks are not as tricky as you may have been led to believe, as long as you have the correct information coupled with the confidence to do them properly. Thorough research on the tasks required will let you make an informed decision whether you can tackle the job yourself. Although not always difficult, plumbing does take a great deal of time so if feel you wouldn’t have the patience then your best option is to call in a professional.

Some people may find little reward in plumbing as no one can see the results of your efforts, but good quality plumbing will allow your home to function well without leaks or endless repairs. For those that feel comfortable trying their hand at plumbing, they may find it easier than they expect. For those that don’t there is no shame in calling the plumber!

Concentrating on latest developments in kitchen cabinet, he writes articles mainly for http://www.kitchen-cabinets-tips.com. From his detailed publications such as http://www.kitchen-cabinets-tips.com/faucets.html, the author established his skill on topics associated with kitchen faucets and countertops.

Is your Plumbing Business Leaking Money?

Any Plumbing business Website not linked into other websites of Industry specialists is leaking money. Any plumbing business not using an Email address in their advertising campaigns is suffering a major money break.

To date, there has not been any organization to show Plumbers how to link together with other trades and their websites. Plumbers need to advertise and market their services better and to understand how linking their websites provides the strength that the World Wide Web now demands.

All the Search Engines on the ‘net have changed their search criteria and if you aren’t linked, you simply don’t get ranked beyond the 100,000,000’nth place. And precious few people look beyond the first 10 to 20 names. People simply haven’t got the time or patience required to search so far.

Constructing Profits shows Plumbers how to advertise their services better through their website and seminars.

Because each Trade in the Building Industry has its own professional Associations, the desire to link with each other simply hasn’t been required. This requirement probably hasn’t been realized yet because everyone is too busy looking after their own people and that is as it should be.

The WWW is now a very demanding monster that is based on content and relevancy. The deciding fact for relevancy is now very much dependent on who links to whom. And this is where constructing profits can provide the relevant ‘glue’ to all the different trade associations, or to independent websites, so that relevancy is established.

We need to construct our own industry network web within the WWW.

Something else that I have found in my recent research is that many (far too many!) Plumbers in Australia don’t even list an Email address in their Yellow Pages advertisements. In today’s world this could almost be called “Business suicide”.

If you are unfamiliar with the ‘net, that is still not a reason for not having an E-mail address to take requests in a written format for a job. You don’t have to have a website to have an E-mail address but you do have to have an E-mail address if you want your business to grow.

The other advantage is to being able to take job requests in writing to protect you legally. If something goes horribly wrong with a job, and you have the job request in writing, you then have legal proof of what the job request entailed.

Many people will write an E-mail but they won’t write a letter. In fact, I would recommend every acceptance of a quote for a job is confirmed by E-mail.

Constructing profits is showing Plumbing and construction contractors how to “link up” to make more profit and spend less hours doing it.

By constructing our own network web within the WWW we gain industry relevancy in the Search Engine algorithms which translates into more jobs from our Email and Websites and more profit for our various businesses.

Constructing profits in a business is the foundation of a sustainable business.

http://www.constructingprofits.com Showing contractors how to make more money ~ working less hours!

DIY Bathroom Plumbing - Sewer and Septic Odor

One common problem many homeowners run into is a sewer or septic odor in their bathroom. It may not be strong, it may not be constant, and it may only occur occasionally but it can be annoying and/or embarrassing when it does happen. Often the first inclination of the homeowner is to attempt to use a cleaner or deodorizing agent to stop the odor. While this may mask the problem, it usually will not address it. One important note for homeowners with septic systems - be careful of what chemicals you put down your drains - bleach and other cleaners can harm the normal operation of your septic system - check with a professional first.

Every drain in your home plumbing system should have a trap installed as part of the line. This is simply a curved section of pipe that "traps" water in it. If you look under your sink you should see an example of a trap. This will usually be a straight portion of pipe from the sink connected to a curved section that dips down and then back up before connecting to another horizontal section where the water exits. If you were to look inside your wall you would see a "T" section where the pipe goes down to your septic/sewer and up to an external vent.

The purpose of the trap is not to capture jewelry or other object dropped down the drain as many think but to hold water to prevent sewer/septic gas (and odor) from entering your bathroom. Every time you use the sink, shower, or tub some water collects in the trap blocking the gases and odor. If a component of your bathroom is not used frequently (i.e, the bath in a guest bathroom) then the water can evaporate and allow some gases to escape back into the bathroom. The good news is that this is very simple to prevent and/or fix. The solution: pour water down the drain. If you keep the trap full of water by running the water periodically you should not have any problems with odor. If this was the cause of your problem then the odor should dissipate in a short period of time once there is water in the trap.

Another possible cause for odor is the build up of slime, mold, hair, etc in the tailpiece (the portion of pipe that comes out the bottom of your sink) or overflow of your sink. The popup stopper in many bathroom sinks and tubs can also build up this "gunk". Use a small flashlight to check and see if you do have any buildup. If you do, clean the buildup out (remember to use a cleaner that is safe for your sewer or septic system) and see if that addresses your odor problem.

If the odor persists, it could indicate a more serious problem and you may want to consult a professional - they will have the tools to correctly diagnose and fix your problem.

Ray Breitenbach writes for Simple Home Repairs. Please visit for more information on how to perform you own basic home repairs.

Don't Get Flushed by Plumbing Problems

There are several plumbing problems that the do-it-yourselfer can fix with little effort and a lot less money than calling a plumber. Remember the DIY motto is to only call for professional help when absolutely necessary. Now there is nothing wrong with hiring a professional because we cannot possibly do every project ourselves but there are many projects that we can do.

Some common plumbing problems include problems with the hot water, problems with the toilet, and problems with drainage in the sink of tubs. With hot water sometimes you may find that there is not enough hot water. This is especially true for larger families. A common cause for this may be that the thermostat on the water heater may be set too low. A fix for this is to adjust the water heater thermostat upwards. This will allow less hot water to be used to still get the temperature that everyone wants.

A common toilet problem is when the toilet does not flush completely. This of course is evidenced by remnants remaining in the bowl after the toilet is flushed. The most common cause is that the ball in the tank is not being lifted high enough. The solution is to adjust the lift mechanism so that it lifts the ball higher in the tank.

A common sink drainage problem is the grease clog. In the case of clogs, the best thing to do is to try to prevent them in the first place. A good way to prevent grease clogs is to pour about a half gallon of boiling water down the drain every other day. However if you already have a grease clog, try pouring some hot vinegar down the drain and letting is set for about 20 minutes and then follow it with boiling water after the 20 minute vinegar soak.

Plumbing problems are one of the top reasons that professional help is sought. However, many of the plumbing problems that you will face can be solved as a DIY project. So make sure that you determine that you are not equipped to solve the problem before you call the plumber.

Are you hungry for more Do-it-Yourself home improvement ideas? Try visiting http://www.home-improvement-know-how.com, a popular website that provides home improvement ideas, advice, and tips for your plumbing projects.

Welcome To Anything Possible Plumbing!

Driving home this morning from Hollywood, a van streaked across from the right to my left, and I was just able to catch the name of the company it belongs to:

ANYTHING POSSIBLE PLUMBING.

Of course, that name got me to thinking.

First thought: Is that grammatical? Shouldn’t it be anything’s possible?

Then, of course, it occurred to me that the owner may not know the difference, and being the melting pot that is Hollywood, it’s quite possible that the boss hails from a foreign country.

Well, then, isn’t that the perfect name for a business? You’ve come to the land where anything’s possible, right? This is the land of opportunity, where one version of the American dream is that anyone can start a business, from scratch, if necessary.

I can only imagine how they handle phone inquiries.

“Hello, Anything Possible Plumbing, how may I help you?”

“Can you fix a broken pipe?”

“Anything’s possible!”

“I like your attitude! Come on by, and give it a try!”

It makes you wonder why more of us don’t inject optimism into our business names.

Instead of Harry’s Flowers, it could be, The Gift of Flowers Is Priceless!

Phone companies could drop boring monikers such as A T & T, and adopt: Great Things Happen When You Phone People, Incorporated, or GTHWYPPI, for short. If they wanted to work another emotion, like guilt, they could name themselves, Isn’t It Time You Phoned Your Family?

All kidding aside, it’s nice that some people are bringing life and verve to their company identities and shying away from “tombstone” names, only. It’s like the folks who answer the line with the cheery words, “”It’s a great day at the Orlando Marriott!”

Even if it’s cloudy or raining, they’re trying their best.

Isn’t that the American way?

Dr. Gary S. Goodman, President of http://www.customersatisfaction.com/, is a popular keynote speaker, management consultant, and seminar leader and the best-selling author of 12 books, including Reach Out & Sell Someone® and Monitoring, Measuring & Managing Customer Service. He is a frequent guest on radio and television, worldwide. A Ph.D. from USC's Annenberg School, Gary offers programs through UCLA Extension and numerous universities, trade associations, and other organizations in the United States and abroad. He is headquartered in Glendale, California, and he can be reached at (818) 243-7338 or at: gary@customersatisfaction.com

Plumbing Tips

If you have ever gone camping for a weekend, you know it doesn't take long to miss running water, flushing toilets, clean clothes, and hot showers. These modern conveniences are the benefits of plumbing systems. Your house has several separate plumbing systems. Sinks, toilets, washers, bathtubs, and related fixtures. Types of pipes for different plumbing usage may vary, from:

1. Copper

2. Plastic

3. Lead

4. Concrete

5. Steel

6. Cast iron

Plumbing is something we use every day and which most of us know little about. Shopping for your own plumbing fixtures rather than getting them through your plumber allows you choose from a wider selection and save money.

Most people are familiar with plumbers, who come to their home to unclog a drain or install an appliance. When construction plumbers install piping in a house, for example, they work from blueprints or drawings that show the planned location of pipes, plumbing fixtures, and appliances.

Water enters your house through a pipe that connects either to a municipal water line or a private well. Faucets, like all plumbing fixtures with moving parts, are apt to require more repair than non-moving fixtures. The less strain you put on your faucets, the less frequently they need repair.

If your plumbing fixtures drain slowly, the problem may be a clogged vent. This happens when vents are improperly located and when birds or animals deposit debris in the vent where it exits the roof.

Whatever your intended plumbing projects, the first step is to familiarize yourself with the water system in your home. At the very least it is important to know where to switch off the mains in case of an emergency.: Roger King has been writing articles on home decorating ideas for several years, and has been helping people find and review the best value for interior design solutions.

Visit his web site www.all-homeinteriordesigns.com for free tips and guides for your home improvement projects

Plumbing Noises: Noisy Water Pipes

Q: Since we have been on higher water pressure from a new source, we are getting more noise in the pipes. Not banging or clunking, just more water moving through the system faster, kind of a "rushing" noise. The pipe into the house is plastic, then hooks into copper pipe. The noise reverberates down the whole line, and since the pipe is strapped to the floor joists, it makes the noise under the kitchen, bathroom and one bedroom. I know about having a foot or so of capped pipe going up from a line to trap air and cushion the noise of "on" and "off" clunking, but this has me stumped. I am at the point now where I am about ready to rip the strapping off and putting foam around the pipes before I strap them back up. Before I spend the money on this, I thought I would check with you to see if that is what I need to do, or can you suggest something else ? Thanks very much.

A: A reduction of 1.5:1 (typically 3/4" to 1/2" is commonly used to increase or maintain water pressure throughout a house. The theory is that, given constant supply pressure, restricting volume will increase velocity. Released pressure at a fixture will be compensated for by this increased velocity.

I expect your hot and cold supply pipes are 1/2 inch diameter. What diameter is the plastic feed? If the reduction is greater than 1.5:1 it's quite likely that the velocity is great enough to cause noise in the pipe.

Check that all the shut-off valves (below the sinks etc.) are completely open. They too, can cause turbulence/noise by restricting water flow. Also, check all the pipes to see if there are any crushed or dented sections.

Foam wrap is a great for insulating purposes, but perhaps a little too soft for noise damping (it would crush flat). By all means, wrap the pipes, but use denser rubber for vibration pads. Extra bracing (for clamping to) might also help.

Alternative: Before you start pulling out nails, check the water velocity at your fixtures, and if it is extremely high, a pressure reducing valve can be installed on the supply line.

Gil Strachan is a professional home inspector, representing Electrospec Home Inspection Services in east-central Ontario, Canada since 1994. Visit http://www.allaroundthehouse.com to learn more about home inspections.

"The Home Reference Book"
You can probably find a home inspection for a little less than what we ask, but you probably won't find the Home Reference Book. A $60 value, this solutions-oriented reference tool comes free with every inspection we perform.
It's the first tool you should have around the house!

How To Train As A Plumber

There are many sources of plumbing training, not all of which is classroom. Standard residential or commercial plumbers, pipe layers, steam fitters and pipe fitters all vary their training in one or many of a variety of methods. Most residential and commercial / industrial plumbing training is offered in technical schools or community colleges. This classroom plumbing training is almost always supplemented by on-the-job training. Steam fitters, pipe layers, pipe fitters and plumbers that work primarily in commercial settings usually get their training through very formalized apprenticeship programs.

Apprenticeships are generally the best plumbing training in terms of a comprehensive look at what the job constitutes. These apprenticeship training programs for plumbers and other pipe specialists are administered by local labour unions and the companies with which they are affiliated or by organizations that represent non-union contractors. Examples of organizations through which one can get plumbing apprenticeship training include the Mechanical Contractors Association of America, the United Association of Journeymen and Apprentices – part of the Plumbing and Pipefitting Industry of the U.S. and Canada; The National Fire Sprinkler Association; the National Association of Plumbing, Heating and Cooling Contractors; and the Home Builders Institute. The latter is a subsidiary of the National Association of Home Builders.

Apprenticeship plumbing training lasts four to five years whether its union or not. Primarily on the job training it also includes a minimum of 144 annual hours in the classroom. The subjects for which the apprentice plumbers receive classroom training include blue print reading, drafting basics, applied chemistry and physics, math, local plumbing codes, plumbing and contracting safety, and legislated contracting and plumbing regulations.

The on-the-job part of the plumbing training includes basic plumbing skills such as learning to recognize the various types and grades of pipe, using the essential plumbing tools, and unloading plumbing materials safely. As the apprenticeship continues and the apprentice progresses in her or his experience, she can learn how to work with and install the various pipes, plumbing fixtures and piping systems. Those who want to apply for apprenticeship plumbing training have to be a minimum of 18 years old and must be in good health. An applicant may have to have a GED or high school education. Someone who has military plumbing training is considered a great apprenticeship applicant. In fact, they may be credited for the experience. Other suggested training that can grease the plumbing apprenticeship application wheels is drafting, general math, reading blueprints, computer skills and physics.

While there is no uniform standard plumbing license, most municipal and state governments in the United States require that plumbers acquire a license. Passing an examination that tests how well they absorbed their plumbing training and how well they can carry out their plumbing tasks is common in many areas. With additional training beyond the basic plumbing courses, plumbers can go on to become supervisors of other construction and plumbing employees, can go into business for themselves or find work as a building inspector.

James copper is a writer for http://www.newcareerskills.co.uk where you can find information on plumbing training

Deciding When To Hire A Plumber For Plumbing Help

Life would not be very comfortable or smell very nice if we did not have proper water systems in place within our homes and offices. As with any system that is used on a daily basis, the essential elements that make up your water supply system eventually start to break down, requiring a good deal of maintenance. Kitchen and bathroom taps and faucets start to weaken and corrode.

Toilet seals set against the floor start to develop soft spots and wear, leading to potential leaking and flooding problems. When possible you should really try to learn the basic elements of the plumbing systems in your home in the event that you need to explain your plumbing problem to a contractor or even (gulp) decide to attempt the project yourself.

Not all plumbing help jobs require years of experience or expensive tools to accomplish. The main thing to remember is that you should always evaluate the particular problem you have to do and decide if you are up to do the work. Do not let your pride talk you into attempting a job that is clearly out of your grasp. You will only end up regretting your decision.

Plumbing Readiness

There is no real way to accurately predict when you are going to have a plumbing emergency. One night you lay down to have a good sleep and the next morning you are wondering what to do with the new pool of wastewater in your basement. There are some minor problems that you can try tackling yourself, like fixing a leaky tap. However, there is always going to be those jobs that simply scream out to be handled by a professional. In addition, in this situation, that is not you.

Sometimes trying to do the work yourself can make the mess worse though so be wary of your decision to jump in and work on any plumbing problem yourself. There are some things you can do to try to minimize damage though, while waiting for the plumbing help to arrive. If the problem is a leaky pipe joint, try to seal the leaking area with tape or cloth. If the leak is too bad, find and turn off the main water valve in your home and call for professional plumbing help.

Helpful Tips

Even people, who know a lot about plumbing need help once in awhile, so do not feel shy about asking for help for your renovation project or plumbing emergency. You never know when you are going to need professional assistance so always make sure you find and keep a reputable plumber’s contact information nearby. To find a good plumber, do not be afraid to ask your friends and family or even the people you work with, to recommend a good plumber they have dealt with before. The yellow pages are not the best place to find a plumber because anyone can advertise their services, regardless of how badly they provide them.

When you are up to your waist in a plumbing help emergency, you do not want to be concerned with finding the best plumbing help at the cheapest rate. This is the reason that you should find someone capable and reputable before you need his services.

You can also find more info on Plumbers and Basement Plumbing. i-plumbing.com is a comprehensive resource to known about plumbing.

Use Caution When Using A Plumber Torch

A plumber torch is one of the most important tools he uses on the job. Usually consisting of a small tank of propane with a gas control nozzle attached, the torch is essential to many of the tasks he has to perform. For some jobs requiring work in close quarters, a larger tank of gas with the control nozzle attached to a set of flexible hoses is used.

Most of the plumbing being installed in today’s homes is made from PVC (Polyvinyl Chloride) material. Special adhesive (plumbers tape) is used to make joints that melts the surface of pieces being fit together to create a watertight seal. Not long ago, most home plumbing consisted of copper piping, which was put together with solder and a plumber torch. A good plumber needed to know not only how to fasten all these pieces of pipe together properly, but also how to do it without wrecking the rest of the water pipe system.

With plenty of experience, some plumbers are able to claim that they can make the solder they work with run uphill. Using his torch to make the top of the pipe hotter than the rest, the plumber can actually get the melted solder to flow towards the hottest part of the joint, thus causing the solder to indeed flow uphill to the other pipe and make the seal.

The Dangers Of Using A Plumber Torch

When using a plumber torch near flammable materials such as interior walls or floors, it is very important to take extreme care not to allow the flame to come into any long-term contact with the materials. Your water emergency will seem like a day in the park compared to a real fire emergency!

In the winter months, some homes develop frozen water lines that a plumber torch can help to thaw out. The plumber will usually start working the flame of his torch from the joint nearest the tap and work his way along the frozen pipe thawing the freeze. The tap is opened fully to allow the melting ice to flow towards that opening. If the thawing procedure is attempted without first opening the tap, the resulting steam build-up could easily cause the pipe or the joints to burst.

If you find yourself with older piping and fittings, you may decide to replace them, which does not cost that much or use a plumber torch and fit the existing piping. You might find the expense well worth changing to PVC piping and getting rid of the old piping in the home.

You can also find more info on Plumber Contractor and Plumbing Repair. i-plumbing.com is a comprehensive resource to known about plumbing.

Basic Plumber Tools For Any Job

Having the right tools for the job is important in any line of work. Some tools are specifically suited for plumbing work. While some tools are important for professionals to have, there are many lower-grade tools that will serve the amateur DIY quite nicely. If you find yourself a DIY project starter, you need to have the tools and materials needed to complete the job successfully.

For many homeowners, working on simple plumbing projects around the home requires a set of basic tools. While it is always, a good idea to buy the best tools you can afford, several jobs will only require simple, basic hand tools to get the work done

The Basic Plumbing Tools Needed

The important thing to remember about plumber tools is that they are specialized to do specific jobs. One important tool that no one every mentions is the plumbers tape. A true plumber keeps this right on his tool belt.

One of the first essential plumber tools you will need is a pipe wrench. However, just as wrenches come in many styles and sizes, they also have many purposes. A basic fixed size wrench set is a good place to start, as there will always be standard sized nuts to turn. An adjustable pipe wrench is one of the best tools to have in your kit as it can easily be adjusted to fit a wide range of nuts. There are several more specialized types of wrenches and they all serve a purpose.

A good set of pliers is also an important plumbing tool. A basic tool usually found in most tool kits is the sliding jaw pliers, which is capable of opening to fit various sizes of nuts and pipes. One of the most common tools to have at your disposal is a set of Vise grips, these are vital in many situations, the adjustable clamping pliers, which will handle almost every sort of clamping or turning job you have to be done. Some of these pliers also utilize a short length of chain to grip smooth pipes or irregularly shaped items. The chain also allows the grip to extend to turn larger diameter pipes.

Stay Prepared and Have Your Tools

Having these simple plumber tools in your home will help you prepare to handle almost any home plumbing repair situation on your own. If you have every wondered about plumbers tools, you now have some idea about the tools and the necessity to keep the tools on hand. Whether you have a big project or a small project, you need the proper plumber tools for the job.

If you need wrenches, screwdrivers, cutting tools or pipe cutters, you can find these at your local hardware store along with the plumbers tape. Keep the plumbers number handy in case a problem arises or you need assistance right away. This would probably cost you some money on the weekend, when most things go wrong, but in the long run a DIY project usually takes place without any problems.

You can also find more info on Basement Plumbing and Emergency Plumber. i-plumbing.com is a comprehensive resource to known about plumbing.

Finding A Reputable Local Plumber

If you are a homeowner, you will almost assuredly have plumbing problems once in awhile. Anything from simple tap leaks to more complicated problems like clogged or leaking pipes. If you find yourself in a plumbing situation that you cannot - or should not - deal with yourself, you need a professional plumber. Why knock yourself out trying to deal with the problem, when help is just a phone call away?

Finding the Right One

When searching for a plumber, stabbing randomly at the phone book listings is not the best way to go about it. The chances of finding a good plumber in this way are so low it is not even worth your time. It is more likely that you will go through many bad ones first before you find anyone who is even up for the job. There are, of course, several qualified plumbers in the phone listings but it is like finding a needle in a haystack - except that, in this case, you are likely up to your knees in a water emergency. There are many amateur plumbers out there, and it is up to you to weed them out from the professionals who can really do the job.

Getting referrals from your friends or people you work with is one of the best ways to find a good plumber. Of course, being a good plumber is not always enough if it takes hours to get the work done. You need to find someone who can do good work, fast. You really do not want some amateur plumber turning something the wrong way, breaking off a tap, and flooding your house, right. So make sure you always take the time to find the best plumber you can afford.

It is not always easy but before hiring a recommended plumber, you should really try to make sure of their reputation. It is important to know if anyone you are acquainted with has had any sort of bad experience with the plumber. It is important to have the right information to be able to evaluate your plumber’s ability to get the job done

Big Company vs. Small

One of the main problems with using a large plumbing company is the fact that they tend to overwork their employees. Unrealistic quotas placed upon the plumbers oftentimes results in quick, sloppy work. However, smaller companies have their own share of specific problems such as small budgets for training programs and not being able to hire the best employees. Referrals from friends and family are still the best way to find the all round best plumber to solve your problem.

You can also find more info on Plumbers and Basement Plumbing. i-plumbing.com is a comprehensive resource to known about Plumbing.

When A Plumber Is A Good Plumber

Most people fix dripping taps as a matter of urgency. Economy is one reason, professionals usually charge a lot for their time that a householder may save a considerable amount of money by doing the job themselves. The second reason might be the thought of having to find a good plumber, then having a complete stranger in their homes. Beyond that chore, plumbing is generally left to plumbers. But, does the plumbing industry deliver the goods? Recently, there has been a revolution in plumbing techniques and requirements. Water supplies are under constantly increasing demand, and care and economy has become essential.

Having a carefully planned plumbing system, every household can enjoy the many convinces it offers and at the same time can keep its water consumption down.

-Repairing a dripping tap while it is still in the drop-by-drop stage saves an amazing quantity of water- a slow trickle wastes a bathful of water a day, and a steady stream wastes enough water to meet all the family's daily needs.

-Repairing a faulty float valve in a W.C cisterns will prevent an incessant overflow that can be irritating to hear as well as extremely wasteful of water.

-Replacing an old W.C cistern with a new pan and a cistern designated to save water can reduce water consumption by many litres a day. The double flushing type makes it possible to choose whet ever to use all or only half of the water in the cistern.

-If you have a shower fitted, you can use a fraction of the hot water required for a bath, giving savings both in water consumption and in fuel required for heating

-During winter, turn down the heating just a few degrees and just put a jumper on, happy in the knowledge that you have done the right thing.

Dan B works for http://www.robuild.co.uk and helps running the Plumbing Department

Things To Know Before Looking For A Plumber

It will never be easy to find a plumber, especially in the big city. Looking through the phone book will get you a lot of plumbers’ names but not their capability as good plumbers. In an emergency plumbing situation the plumber you get on the other end of the line needs to be not only fast, he has to be good as well. Consider yourself lucky if after finding this miracle worker he can even see you on the same day as you call. If you are in desperate need to have your problem solved, follow these tips to help you contact a plumber quickly.

Agree To Be Flexible

In an emergency, you may have to try people who are moonlighting. You will almost assuredly have to adjust your timetable to fit their availability schedule. In some cases, the plumber has a regular job and a full work schedule for the day and may only be able to help you in his off-hours. However, given little choice in the matter of your emergency, your best bet is to accept whatever time slot the plumber can fit you into on his schedule.

If the only available appointment is after dinner or very early in the morning, it would be in your best interest to accept the small inconvenience to your schedule and allow him to come and fix your problem. Your only other option is to stick to your guns and keep trying to find available plumbers willing to work around your schedule. It is always going to be hard trying to find an available plumber when all you hear is water dripping within your walls or basement.

Agree To Pay A Bonus

You can always bet that the best way to ensure the job gets done is to offer a bonus as an incentive. Put away your pride and your thoughts about your budget and try to focus on the importance of getting the problem fixed and over with. In the end, if you wait too long searching for a plumber, the cost to clean up the water damage will far outweigh any bonus you might have offered. Provided the plumber you find is reputable enough and can come right over, the bonus is always going to be worth it to pay. Always remember, the longer you wait, the more expensive the water cleanup costs will be.

You can also find more info on Plumbing Repair and Toilet Plumbing. Sressmanagementmethods.com is a comprehensive resource to known about stress management.