Opportunities in Plumbing

An article reveals the wide opportunities awaiting for plumbers in coming years.

When choosing a business you want to start or pursue, the opportunities are huge and there are a wide variety of business models that you should consider before deciding on one.

Discussed below you will find statistics and analysis of the plumbing training as a business opportunity for you. Government economists expect average job growth for plumbers, compared to growth in other careers, through 2014. You should find plenty of work if you choose plumbing, because there won?t be enough job hunters to take all of the open positions.

The average yearly salary for plumbers is about 27K GBP. Keep in mind that apprentices start work at half the salary earned by experienced workers. You can expect to receive raises throughout your training though, often every six months. Interestingly both men and women are suited for the plumbing profession and as the above shows it pays more than various other professions.

The above makes it clear that the plumbing industry and the requirement for plumbers is growing and will grow in the near future. The plumber?s need to be trained for the above and hence plumbing training opens a host of opportunities for you.

Prince Mathew is a freelance writer of Fast Plumb, offers you plumbing training with plumbing franchisee business options. The Fastplumb package has been designed and will enable you to start your own plumbing business with the well-known brand of Fast Plumb. The Fast Plumb franchisees are offered with training from professionals and after the successful completion of the training you are allocated a territory not allocated to anyone else

DIY Bathroom Plumbing - Installing a New Showerhead

Of all the home plumbing repairs you could tackle, the replacement of an old showerhead with a new one is probably the easiest. A shower plumbing project is a good starter project for a number of reasons. No special tools are required, the necessary parts are pretty close to one size fits all, and if you do make a mistake and have a leak, the only thing that gets wet is your shower/bathtub. This is the perfect project for the novice home repair handyman to start with and can usually be completed in well under an hour.

The first step is to decide what type of shower head you want to replace. While most shower fixtures connect to a standard size pipe thread, you must make sure you have enough clearance for your new showerhead. If the stem (the portion of the pipe from the wall to the existing shower head) is short or close to the ceiling you will want to check before purchasing a large fixture.

The Tools You Need - For this project, you will need a wrench or pliers and some teflon tape. Depending upon the age of your existing fixture, you may also need to have a pipe wrench on hand as well. You may also want to have something available protect your fixture from the jaws of the wrench or pliers (a folded rag or piece of rubber from an inner tube work well)

Remove the Old Showerhead - If you have an older unit you probably have some rust, oxidation, or lime buildup that may make removal difficult. If the fixture does not readily unscrew, use two sets of pliers/wrenches (with the jaws of each protected as indicated above), one set on the stem and the other on the fixture. Apply equal pressure to both sides to until the showerhead starts to move. Be careful not to apply too much force as you do not want to break either the stem or existing showerhead. Once the shower head starts to turn you should be able to remove it by hand.

Clean and prepare the stem pipe - A little preparation here could save you quite a bit of time later if you decide to replace the showerhead again. Clean the threads of the stem of any rust or lime and apply teflon tape to the threads. This will help the new showerhead install easily, provide a good seal, and make it easier in the future if you ever have to replace the shower head again.

Install the New Shower - If you selected a simple replacement showerhead all that remains to be done is to screw the new fixture onto the prepared pipe stem. Make sure not to over-tighten when you are installing this - hand tight plus a quarter or half turn is probably all you need. If you have purchased a more sophisticated fixture like a shower massage wand you may have a few pieces to install. Make sure that you apply teflon tape to all threaded connections (unless otherwise specified by the manufacturer) to ensure a good seal.

Test It - Before putting your tools away and jumping in the shower take a few minutes to make sure the job is done. Turn on the water and check each of the connections for leaks. If you find any, usually they will be fixed by tightening the connection another quarter or half turn. If this does not address the problem you may need to check for a missing or worn washer.

Ray Breitenbach writes for Simple Home Repairs. Please visit for more information on how to perform you own basic home repairs

Finding a Plumber

Know when it's time to call a professional

Plumbing repairs in your home are a big job. When you feel like screaming at the pipes and fixtures in your home, it?s time to call a professionally licensed plumber. The right plumbing services can really take a lot of stress out of your life. With your home's plumbing working again, you?ll wonder why you didn?t have the work done sooner.

Everyone deserves good plumbing in their home. Whether you have a big family, or you live alone, top residential plumbing is absolutely a necessity. A qualified plumber can get yours working again and restore your peace of mind. The right plumbing company will work efficiently and skillfully to make your life easier.

Plumbing for commercial real estate

If you are in the commercial real estate business, then plumbing is probably on your list. Whether you are looking to put pipes in your new construction home or re-do the plumbing in an older commercial office building, a certified plumber is essential. The executives that will work in your building will be grateful you hired a professional and got the job done right the first time.

Don't be overwhelmed by plumbing problems - a professional can come to the rescue

Every home owner experiences special situations and problems with their plumbing from time to time. Things like regular drain cleaning, fixing leaks, and tackling noisy pipe problems can be extremely frustrating. Don?t let these problems overwhelm you. One of the many wonderful certified plumbers is available to come to your rescue.

Related resources:

Satellite internet service provides high speed connections and unlimited access anywhere around the world. Sign up now for your home, laptop or business.

For search engine optimization, web design and high quality custom graphics Archetype Development is your source for all your web design and marketing solutions

Build incoming links to your website. Submit your site to our search engine friendly directory for free.

How Plumbers Replace Bathroom and Kitchen Sink Faucets

If you are considering upgrading your bathroom and kitchen sink faucets, you have come to the right place. The following explanation will make your task much easier and will save your time as well.

However, before we start, make sure that you have following materials ready with you.

- New faucet assembly
- Basin wrench
- Adjustable wrenches
- Slip-joint pliers
- Scouring pad

Now follow these simple steps. (Assuming that you are replacing the old two-handled faucet with the more modern single-handled type)

Replacing Kitchen Sink Faucets 1. Before you start, go at the shut-off valves under the sink, and turn off the water.

2. Open the faucet so that it could drain any excess water.

3. The next step is to disconnect the hot and cold water supply lines from the shutoff valves. You can use a small adjustable-wrench to do this.

4. Reach up behind the faucet. You will find the coupling nuts that connect the supply tubes to the faucet. Unscrew the same using a basin wrench.

5. Behind the faucet, you will also find mounting nuts that hold the faucet in place. Remove these nuts using the same basin wrench.

6. Now that you have disconnected the mounting nuts, you can lift out the old faucet. Lifting it out, disconnect the sprayer hose from the assembly using an adjustable wrench.

7. Lift out the sprayer hose, and remove the faucet.

8. Once you have removed the faucet, clean the surface of the sink thoroughly with a scouring pad.

9. Remove the escutcheon cap and replace the same with the one that is included with your new faucet.

10. Now you are ready to make the new connection. Bring your new sprayer hose, and slip it down through the sprayer hole.

11. Feed the sprayer hose up through the center faucet hole, and connect the hose through the sprayer nipple using an adjustable wrench.

12. If the hot and cold supply tubes of the new faucet have a different length, attach flexible connectors to the fittings on the supply tubes. Hold the faucet fitting stationary with one wrench and tighten each connection with another wrench.

13. Insert and feed the supply lines and the connectors into the center hole, and then seat the faucet.

14. Now crawl up under the sink and in order to hold the faucet in place, install a washer and nut to the end bolts.

15. First, tighten the nuts by hand, and then with a basin wrench.

16. Connect the supply lines to the shutoff valves, and turn the water on.

17. Turn on the faucet and check for leaks.

Replacing Bathroom Sink Faucets 1. Go underneath the sink. Turn off the water. Loosen the collar nuts on the drainpipe.

2. Drain any excessive water, and then remove the drainpipe.

3. Loosen the nuts that hold the pop-up assembly in place under the sink using slip-joint pliers.

4. Unscrew the pop-up flange in order to free the assembly underneath the sink.

5. Remove the fittings that join the supply lines of the old faucet to the shutoff valves, using a wrench.

6. Repeat the steps 4-15 as explained above for replacing kitchen faucet.

7. Now, you have to install the pop-up assembly.

8. Push the pop-up rod down through the body of the faucet.

9. Attach the flat bar.

10. At the bottom of the new flange, use a little plumber's putty to hold the tailpiece so that the whole assembly protrudes up through the drain hole in the sink.

11. Spin the ring to position the same with the tailpiece under the sink.

12. In order to secure pop-up housing in place, tighten the nut on top of the tailpiece.

13. Hook up the pop-up lever onto the flat bar in order to secure it to the pop-up housing.

14. Drop the stopper into the drain hole.

15. Replace the drainpipe.

16. Tighten the collar nuts.

17. Turn on the faucet and check for leaks.

Hence, replacing a kitchen and a bathroom faucet is almost similar except for the work related to the pop-up assembly that is included with the bathroom sink.

Owen Walcher writes for the Best Plumber Resource which provides plumbing tips to consumer and helps people find quality plumbers in Georgia. plumbers.besthomeresource.com

Plumbing Schools Train for Lifelong Careers

Plumbers are not only those people who fit pipes and unclog drains in private homes, plumbers also are pipelayers, pipefitters, and steamfitters. Plumbing Schools train to install, maintain, and repair various types of pipe systems for various needs.

Plumbing Schools train in laying pipe systems that dispose of waste products; provide gas to stoves, heaters, and furnaces; and pipelines for cooling systems. Plumbing Schools also train in metal fabrication for applications in power plants, for pipes that convey steam that power turbines to produce electricity or heat. Plumbers apply their trade in manufacturing plants, laying pipes to move materials along production lines. Pharmaceutical and computer-chip manufacturing industries also provide occupations for plumbers.

Plumbing Schools prepare graduates with the theory and knowledge of plumbing for entry-level position in the plumbing industries. Plumbing Schools train for lifelong careers with practical skills, education, and real-world experience.

Pipefitting and Plumbing School programs prepare students with courses in mathematics, physics, chemistry, safety, and industrial and plumbing codes. Students also learn to interpret blueprints, and get hands-on experience using components of various types of pipes and fittings. The tools used in the trade are also studied and applied in laboratory settings.

Graduates often enter into apprenticeship programs for approximately four years, though Plumbing Schools can provide skills that allow for obtaining a license, and entrance into employment in some areas of the plumbing field.

Plumbers may work in different areas of the field, such as gas installation, refrigeration, water supply, or pipe welding. Most programs focus on residential or commercial buildings, but some Plumbing Schools prepare students with competencies in sheet metal fabrication and soldering, as well as installation of hot water and heating systems.

Plumbers generally work in commercial and residential settings, installing and maintaining water and waste systems. Pipelayers with knowledge and expertise in fabrication build pipelines that transport gas, oil, and chemicals to supply stations. Pipefitters and steamfitters work in industrial and power plants environments.

Plumbing fields may sound like an unpleasant occupation, but they can be very lucrative. Pipelayers, plumbers, pipefitters, and steamfitters can be very well paid. Entry-level positions can net $30,000. Experience, education, and expertise in some fields of plumbing will earn several times that amount.

If you are interested in learning more about Plumbing Schools and other types of schools, please search our site for more information and resources.

DISCLAIMER: Above is a GENERAL OVERVIEW and may or may not reflect specific practices, courses and/or services associated with ANY ONE particular school(s) that is or is not advertised on SchoolsGalore.com.

Michael Bustamante is a staff writer for Media Positive Communications, Inc. in association with SchoolsGalore.com. Find Schools, Colleges, Universities, Vocational Schools and Online Schools at SchoolsGalore.com; meeting your needs as your educational resource to locate schools.

Plumbing - U-Trap Pipe Replacement

A few weeks ago, our family noticed water coming out of the cabinets around the kitchen and bathroom sinks. With a little inspection, we discovered the same problem in each case was at fault. The U-trap pipe was leaking due to being worn out from years of use. The pipe as its name suggests is U-shaped.

The importance of the U-trap other than keeping your floor dry and getting rid of water is that because some water is in the bottom of the pipe at all times, this helps prevent sewer gases from entering your home and harming you or your loved ones.

After diagnosing the problem, the next step is to go to the hardware store and get a replacement. Other than a flashlight (no matches or open fire source!), you will need a pipe wrench(only if you can't use your fingers to remove the nuts holding the pipe) and replacement pipe (either metal or PVC). You should check the pipe to see if you can remove it without a wrench, thus saving you some money if you don't need one, providing there is not one in the toolkit already. A word about pipe wrenches: You know that number they give such as 18"? That refers to the handle length AND the full opened width of the wrench jaws. Confusing, huh? Just be sure you pay for what you need.

After getting what you need from the store, unscrew the collars or nuts around the pipe, gently move it a bit to see if it moves, then pull out of position, and insert the new pipe and appropriate hardware. See that it is secure. Turn on the water. Check for leaks. If you have anymore problems with leaks from the same source, recheck all pipe connections for the U-pipe and P-pipe. The P-pipe is the one that leads from the U-trap pipe into the wallpipe connection, which, as the name suggests is the pipe leading into the wall and from there the sewer.

C. O. IRBY, III
bingle42@yahoo.com
I learned home improvement by doing it myself, but since I'm still learning I would be glad to hear from you any tips you have. I live in a 50+ year old house.

Overview of the Training Necessary to Become a Plumber

 

Do you actually know what a plumber does? It’s not just about unclogging toilets or stopping leaks. Think you might have what it takes? It is not an easy job, but if you will put all your dedication to it, you can fulfill the requirements and earn yourself the title.

Plumbers do the job of installing and repairing gas. They also put up water and waste systems for commercial, residential and industrial clients. They install residential plumbing fixtures and appliances to newly built homes also during renovations. You might never know that plumbers are paid at a high income. Although plumbers are well-paid, many people shy away from this job opportunity because or the hard labor or long hours.

If you want to be a plumber, you need to be in a good and healthy condition. There are some steps you need to understand and practice if you want to be a good plumber.

Just because the title of plumber is not as prestigious as that of a doctor or lawyer, doesn’t mean that you don’t need special education. You will need to complete high school, take up a math, science or shop course if you may possible take it. Vocational courses are helpful such as plumbing and blueprint reading.

If you wish to find a job with regards to plumbing, you can ask a guidance counselor about the different plumbing opportunities in your local area. If you want a broader search, you can search the internet so you will gain a lot of information.

There are a lot of plumber’s unions, and if you wish to be a part of them, you need to apply for a four year apprenticeship which involves approximately 2,000 hours of training and a little as 216 hours for classroom work. This is where you can enhance your plumbing experiences and knowledge. You will also be able to apply your knowledge in it.

If you wish to go out alone with your own training, you can enhance your plumbing skills through applications and a little comparative work like fixing your own leaks at home or your friend’s. In this way, you will be able to fine-tune your abilities and prove that what you are doing is correct.

There are many trade schools that offer plumbing courses. The advantage of joining trade schools is that you will often be receiving job-placement services if you have qualified for the completion and requirements of the course.

Now if you are free, you can check out all the small plumbing problems in your area or neighborhood but you have to make sure that you have already the proper knowledge because your performance will reflect on your reputation. So if you are still a beginner, make sure that you will handle the plumbing problems properly. If the people in your area have proved that you are a good plumber, they will recommend you to other people and this will be the start of your career.

Jo Williams has an interest in Home & Garden and Plumber Training, for more FREE information and articles please visit Plumber Training Resources