Plumbing-when To Do It

We all know the story of the homeowner who tried his own plumbing repairs and ended up paying more since the plumber had to fix the repairs. Recognizing when the job is too big or too complicated for the ordinary homeowner is not easy-handyman egos are too easily bruised. However, plumbers are notoriously expensive so you want to make sure you really need one before you call him. There are a number of things you can do to make sure you will keep your costs of plumbing repairs at a minimum.

First of all, don't compare the prices of plumbers based solely upon their rates. Make sure you know all of the costs involved. One plumber may have lower advertised rates, but charge mileage which will increase the price of the job. Some plumbers start the clock when they get to your house, others may start it as soon as they leave their shop. Find out if they charge by the quarter hour; if they charge by the hour, you may have to pay for a full additional hour even though the job only went a few minutes over. Make sure you are fully aware of the real rates, so that you are comparing apples to apples. Another good idea is to ask around with friends and families for a reputable plumber instead of relying on advertisements.

Keep your plumbing jobs down altogether by taking good care of your plumbing. Most plumbing emergencies are caused by backups. Avoid having items such as grease or hair, which are responsible for most clogs, go into your drains. Putting vinegar, followed by boiling hot water down the drain is said to cut through grease clogs. Use a mesh catch in all of your drains to catch hair and avoid it going down the drains. Use a drain cleaning product once a month to keep the drains clean.

If you do hire a plumber to install a fixture, save money by buying your own fixtures. A plumber will add a premium to any fixtures he has to obtain for you. Just make sure you agree upon the type of fixtures you will use. Some plumbers won't guarantee certain cheaper brands.

If you keep all of your plumbing fixtures properly maintained, you can almost eliminate the need for a plumber. Make sure fixtures are attached properly and tightened. If you do call a plumber, make sure you know exactly what the problem is so the plumber can fix it and get out; don't forget he charges by the hour so you don't want to spend precious time discussing the problem. Keep a list of plumbing problems, so that if you have to call a plumber for one thing, you can have him fix everything in the same visit.
Focusing recent findings in truck tool storage, Ray Walberg published predominantly for http://www.insidewoodworking.com . His abstracts on kennedy tool boxes can be found on http://www.insidewoodworking.com/boxess

Plumbing Supplies Wanted

We have registered with the Pa Dept. of Environmental Resources as a place where you can drop off your unwanted items such as old tools, tractors, plumbing and construction supplies, farm implements, fencing materials, usable nuts and bolts.... well you have the picture, things we can use around our farms. If we can't use them maybe we can send it on to someone else that can???? We are always looking to trade nursery stock and seedlings for your surplus. Email us with your surplus materials. We may be able to make trades.

I once put an ad in the paper that said, "If it's free it's for me". I had to stop the add because I collected so much stuff. Ads do work. The problem with this ad was it was not specific enough to target what I was looking for. Over time and years I then started to swap and barter the free stuff that I got for things I really wanted. I had hundreds of broken lawn mowers and hundreds of gallons of old unwanted paint. I had enough paint to dip a house if needed. Disposal now became an issue. Thus I came up with the idea of trading and barter. Now I did not invent this wheel but I had enough of them that it appeared I might have. So barter has become a means of swapping and exchanging my surpluses for other people's surpluses. Since I am in the nursery business I also have plants that are surplus. I may plant 1000 trees expecting to need 1000 and find that I have 500 more than what I need. So offering these trees on the web for barter has been an effective means to move dormant inventory. Besides this is a great way to meet new customers. When they have surpluses and I can move their dormant stock, we both win. Here is a sample ad that I ran on my web site seedlingsrus.com :

Trades Wanted

We are always looking to trade nursery stock and seedlings for your surplus. Email us with your surplus materials. We may be able to make trades. Construction materials and equipment...doors, windows, boards, hardware Plumbing supplies...pvc pipe and fittings, pumps, heaters, copper pipes and fittings Hunting and fishing gear...ammo, reels, rods, tackle, boats, canoes, paddles and yes...even snakes..... .

Hand tools...saws, drills, hand power tools, blades cutters hammers, wrenches, tool boxes Farm implements...out door power equipment, tractors, wagons, fertilizers, pesticides, used cans of oils and lubs Farm supplies...shovels, rakes, farm bells, an anvil, blacksmithing tools, generators Fencing materials such as woven wire and split rail fencing, fence chargers, barbed wire, wire, nails, nuts, bolts, surplus pavers, Palletized stone, field stone,flagstones, rocks,boulders Household items such as wooden furniture, tables chairs, cabinets and dressers Livestock..pigs, goats, cows, donkeys, chickens, peacocks, sorry no sheep(I don't trust myself with them).

These adds are not what GM of Ford would use...but they are going broke!!!!

About the Author

Bill Hirst has been growing plants on his 200 acre farm in Bucks County for 30 years. His web sites are http://www.seedlingsrus.com and http://www.digatree.com Sign up for Bill's newsletter at http://www.seedlingsrus.com/123456signup.html

Plumbing Help: How to Avoid Burns at Home When Setting The Water Temperature

Sometimes it seems like your shower or sinks are too hot, or not hot enough.

But raising the temperature valve on your water heater can be dangerous or a waste of energy. If there are children, elderly, or disabled persons in your household, for example, you might not want to set the thermostat above 120 degrees Fahrenheit to avoid contact with ?hot? water.

The following chart may help you determine the right temperature for your water heater. According to Shriners Burn Institute:

- Water set to 125 degrees generally takes about 1.5 to 2 minutes to scald.

- Water set to 130 degrees generally takes about 30 seconds to scald.

- Water set to 135 degrees generally takes about 10 seconds to scald.

- Water set to 140 degrees generally takes about 5 seconds to scald.

- Water set to 145 degrees generally takes about 3 seconds to scald.

- Water set to 150 degrees generally takes about 1.5 seconds to scald.

- Water set to 155 degrees generally takes about 1 second to scald.

So you can see how small increases in temperature can have a large effect on scald times.

People are often concerned about raising the temperature on their water valves due to a bacteria known as Legionella (and the disease known as Legionella's disease) that thrives in water at a temperature of 105 to 115 degrees.

Since this bacteria cannot survive above a temperature of 131 degrees people often look to exceed that temperature despite the risk of scalds.

Fortunately, the solution is a simple one. A device known as a water mixer allows your water to be heated to a point that will kill off all harmful bacteria, but sets a different max temperature to water being distributed to your tap water in sinks and showers.

A plumber can install this device for you quickly and without great expense!

Donald Koen is a master plumber and owner of Koen Plumbing, a Dallas Plumbing Company since 1946. If you're looking for a Dallas Plumber, Donald can offer expert assistance through his website www.KoenPlumbing.com

Plumbing Help: How to Avoid Burns When Setting Your Water Temperature

Sometimes it seems like your shower or sinks are too hot, or not hot enough.

But raising the temperature valve on your water heater can be dangerous or a waste of energy. If there are children, elderly, or disabled persons in your household, for example, you might not want to set the thermostat above 120 degrees Fahrenheit to avoid contact with "hot" water.

The following chart may help you determine the right temperature for your water heater. According to Shriners Burn Institute:

- Water set to 125 degrees generally takes about 1.5 to 2 minutes to scald.
- Water set to 130 degrees generally takes about 30 seconds to scald.
- Water set to 135 degrees generally takes about 10 seconds to scald.
- Water set to 140 degrees generally takes about 5 seconds to scald.
- Water set to 145 degrees generally takes about 3 seconds to scald.
- Water set to 150 degrees generally takes about 1.5 seconds to scald.
- Water set to 155 degrees generally takes about 1 second to scald.

So you can see how small increases in temperature can have a large effect on scald times.

People are often concerned about raising the temperature on their water valves due to a bacteria known as Legionella (and the disease known as Legionella's disease) that thrives in water at a temperature of 105 to 115 degrees.

Since this bacteria cannot survive above a temperature of 131 degrees people often look to exceed that temperature despite the risk of scalds.

Fortunately, the solution is a simple one. A device known as a water mixer allows your water to be heated to a point that will kill off all harmful bacteria, but sets a different max temperature to water being distributed to your tap water in sinks and showers.

A plumber can install this device for you quickly and without great expense!

Donald Koen is a master plumber and owner of Koen Plumbing, a Dallas Plumbing Company since 1946. If you're looking for a Dallas Plumber, Donald can offer expert assistance through his website http://www.KoenPlumbing.com.

Plumbing Courses

The plumbing profession employs both graduates of formal plumbing courses and people who have gained their experience on the job. This profession, however, is changing. Increasingly, governments are mandating that trades be regulated and licensed: all individuals entering the professional in an area where such legislation exists will have to have formal education in the trade and pass exams to demonstrate their knowledge and skills. At this time, anyone considering a career in plumbing should regard a training program as mandatory.

Plumbing school is comprehensive education in all aspects of the trade. Students learn how to read blueprints and follow the specifics of construction code. Construction of plumbing systems, including hot and cold water supplies, plumbing fixtures, waste water systems, venting techniques, and troubleshooting of leaks and other plumbing problems, is basic to the training. Plumbing courses also consolidate background knowledge of mathematics, physics, chemistry and biology that the plumber needs to do the job with competence.

Plumbing school is a good career move at this time as the profession is growing and is expected to expand considerably more in some areas over the next five to seven years. Overall, an increase in demand of about 16 percent is expected across the United States. According to America's Career InfoNet, the states of Idaho and Nevada, meanwhile, expect to need 40 percent more plumbers or more, with other states in that area also expecting large increases. Tradespeople, including plumbers, are also in great demand in many areas of Canada due to cutbacks in plumbing courses and other trades training programs in recent years.

Plumbers work for large and small construction firms, commercial and government complexes where constant maintenance is required, various industries, and many are self employed. On average, a plumber in the United States earns about $42,000 a year, with the scale ranging from around $23,000 to $70,000 annually. Graduates of plumbing courses have an obvious advantage in the job market: even where the profession is not regulated, prospective employers will often choose an educated individual over one they would have to train themselves.

Stats used from PayScale, America?s Career InfoNet, and the US Bureau of Labor Statistics.

R. Drysdale is a contributing editor to Plumbing Courses at Accredited Online University, your one stop resource for the very best online college degree programs.

Green Plumbing - Rain And Grey Water Harvesting, Solar Hot Water Systems - Melbourne, Australia

With increasing climatic condition change and prolonged drought conditions in Ausralia, many people are trying to save water and energy on the dryest inhabited continent on earth. The buildings in which we live, work and play, protect us from the elements but also shape the environment around us. The construction and operation of buildings requires a huge input of resources. The location of buildings and what resources are used affects the ecosystem in a number of ways. As the environmental impact of buildings becomes more apparent people are looking for ways that can significantly decrease this impact and make their homes and offices healthier to live and work in.

Some of the biggest long-term challenges facing our nation are securing sustainable water and power suppliers for our future and reducing the production of greenhouse gases to limit the impact of climate change.

We live on the driest inhabited continent on earth, yet are one of the highest per capita consumers of water. Melbourne is experiencing the lowest level of water supply in many years. Yet we each consume, on average, 400 litres of water every day.

Many people assume that we are in a current state of drought and that when the drought breaks we will have adequate amounts of water to go back to using it like we have in the past. However, this is not the full story. Australia has always had little rainfall and as our population increases so will pressure on water and power. We can all make an individual difference that will assist this nation in its endeavours.

Strategies that can be employed include installing rain water tanks, grey water irrigation systems, solar hot water systems, solar heating and other water and energy conserving means. To assist, the State Governments have included rebates for water saving devices in their strategies.

Sustainable Plumbing P/L is a Melbourne leader in the field of green plumbing and works with other partners such as specialist sustainable landscape architects and designers to achieve aesthetic design with these sustainable water and solar strategies

Rain water tanks and harvesting, grey water irrigation systems, solar hot water systems, solar heating and other water and energy conserving means in Melbourne, Australia.

You Can Do It Yourself-Tackling DIY Bathroom Plumbing

Do it yourself. A generational catch phrase born from the crop of reality-based television programming that has captured an audience with extravagant remodels accomplished over a weekend and elaborate decorating on a budget. Do it yourself ? or DIY - always existed as concept ? budget-conscious homeowners pulling up their sleeves to tackle a project armed with tools and the ability to think on their feet. But the phrase do it yourself has produced a whole new harvest of weekend warriors filled with newfound confidence and eager to experience the self-satisfaction of a job well done.

Nothing seems to urge on do-it-yourselfers like a DIY bathroom plumbing project. The evidence lays in the community of homeowners who have dug in their heels, refusing to shell out hard earned dollars to a plumber simply to rectify a leaky faucet. The DIY bathroom plumbing project runs the gamut from drippy faucets and running commodes to noisy nozzles and flooding floors. But even more diverse are the extended projects that result from this initial foray into DIY-land. Suddenly, a DIY bathroom plumbing project becomes a full-blown remodel ? vanities replaced; showers re-tiled; original floors swapped for their newer counterparts.

For those who have strapped on their tool belt and begun their journey into their DIY bathroom plumbing project, there are a few things to keep in mind. First and foremost, it is imperative that before beginning any repairs of sinks, toilets, and showers to turn off the water to that location. Nothing ends a DIY bathroom plumbing project quicker than a surprise flood. Further, any project involving electricity should be handled with extreme caution. Just as you turned off the water ? turn off the electric power in the bathroom before tackling any projects.

Secondly, be sure that you have the appropriate parts to complete the DIY bathroom plumbing project. Parts that don?t fit will elongate the project and can easily end with disastrous results.

Finally, do your homework. Be sure to research the DIY bathroom plumbing project prior to starting. The Internet can be an enormous source of information as can your local home improvement store. And remember, you may be doing it yourself, but that doesn?t mean you can?t call in a professional if you get in over your head. Sometimes a pro can actually wind up saving you money in the end.

If you are well-researched, organized, and on your toes, your DIY bathroom plumbing project can pay dividends. Not only will you have the bathroom you want, but you?ll have the unrivalled satisfaction of knowing you did it yourself.

For easy to understand, in depth information about plumbing visit our ezGuide 2 Plumbing.

Everything You Need To Know About Plumbing Courses

Plumbing courses are available at trade schools all over the UK and other parts of the globe. They are also available online as well. Plumbing is in high demand and commands high wages. Plumbing courses can be your path to financial and career success.

Plumbing is one of the most respected and most specialized set of skills in the building and construction services trades. Plumbers are essential and wear many hats. Plumbing courses teach them how to help make water run smoothly, keep toilets flushing correctly, wastewater correctly treated and pipes staying secure without leaks.

Plumbers can install or repair water heaters, fix frozen or burst or leaking pipes. Of course, plumbing courses will teach would-be plumbing specialists to install pipes and other fixtures in new homes under construction as well.

There are many parts of a new home the repair and servicing of which can only be accomplished by a properly trained and licensed plumber.

Online plumbing courses can pave the way, at times and places convenient to the student, for a lucrative and satisfying career in the plumbing trade.

One online school that we perused offered plumbing courses whose exams were all open book and open notes. The students learned their plumbing courses at their own pace and were able to graduate in as few as six months. Graduation after completing all the requisite plumbing courses provides the students with a diploma with national accreditation.

No prerequisites or related experience is required to enroll in this trade school. At that is needed to learn the plumbing trade, besides satisfactory passing of all plumbing courses, is the ability to use simple trade tools, satisfaction from a job working with your hands and the motivation to get out there and market yourself.

Plumbing courses at this school include soldering copper pipes, plumbing basics such as installation and leak repairs, faucet basics, valve repair and water supply systems.

Plumbing technology 101, the first course, outlines the basic of the plumbing trade. The goal of this first course is to teach students the basics of the trade or to familiarize homeowners with some do-it-yourself techniques.

Many of the issues addressed in this first of the plumbing courses are those that will come up nearly every day in a plumbers work life. These include the system that supplies a residential or commercial building with water, soldering, vents and drains, installation of plumbing related fixtures and repair of the same.

The specifics of the course include a look at basic plumbing safety tips and familiarization with the jargon and basic terms of the plumbing trade. Soldering is an important part of this plumbing course too.

After this lesson each student should be able to select the appropriate soldering materials, clean the metals to get them ready for soldering, prepare the joint and solder a tubing connection the proper and safe way.

Water service is part of this basic course materials and training. Students learn the layout of a home or commercial basement, the ins and outs of selecting the right materials and the proper location of the required equipment.

Students learn to install a drain, as well as a ventilation and waste system. They also learn about installing fixtures in these online plumbing courses.

James Copper a lecturer for a training college that offer plumbing courses for mature career changers that want to become a plumber.

Plumbing Is Often Neglected In Home Improvement Plans

If you are planning to take on a home improvement project, the plumbing involved is probably something that is causing you to worry. Whenever you make major alterations to a property plumbing is usually involved and needs to be done properly. It is easy to gloss over the importance of plumbing in your home improvement projects, making sure it is done well can save you time, money and stress in the long run.

You should consider where plumbing will be involved in your project before you start and make sure you plan for it in advance. Usually home improvements that involve a kitchen or bathroom will involve a degree of plumbing work. Depending on the scope you may feel capable of tackling the project yourself, or you may want to play it safe and employ a professional. You should get a quote and ensure your plumber is available before you begin your project.

Plumbing is an area that most homeowners are not shy about admitting they don?t have a clue about. Many avoid the issue, being happy to pay someone else to tackle the problem for them, but there is actually a surprising amount the homeowner can do for themselves. There are whole range of books and websites available with diagrams and detailed instructions to guide you through simple or even fairly complicated plumbing tasks. The types of tasks that can easily be undertaken using an online plumbing guide or handbook include installing a new faucet or drain tap. If you want to replace long lengths of pipe, on the other hand, you may be best to find someone with plumbing experience. Perhaps you have a friend who would be willing to help out which will reduce the overall cost of your home improvement project.

Producing a detailed plan with timelines for your project and the plumbing activities involved, will help you to identify what you can do yourself and what you need to involve a professional to help out with. Your time line will be a good way to keep track of what needs to be done, how it will be done, and by whom.

Plumbing activities can involve anything from replacing a faucet to installing new pipes and most tasks are not as tricky as you may have been led to believe, as long as you have the correct information coupled with the confidence to do them properly. Thorough research on the tasks required will let you make an informed decision whether you can tackle the job yourself. Although not always difficult, plumbing does take a great deal of time so if feel you wouldn?t have the patience then your best option is to call in a professional.

Some people may find little reward in plumbing as no one can see the results of your efforts, but good quality plumbing will allow your home to function well without leaks or endless repairs. For those that feel comfortable trying their hand at plumbing, they may find it easier than they expect. For those that don?t there is no shame in calling the plumber!
Johnathan Bakers often publishes long articles on areas relating with kitchen cabinet and countertops. His contributions on kitchen faucets can be found on http://www.kitchen-cabinets-tips.com/faucets.html .

Cooking - Kitchen Valve And Hose Plumbing

When fixing a kitchen sink, you can experience a home improvement project that is either pretty straightforward or nightmarish. A lot is dependent on your hoses? and valves? overall condition.

Most people are capable of turning off the water supply valves, using some clockwise turns. However, aging valves or unused ones are subject to breakage, and may begin to leak. You should always have help nearby, ready to turn water valves controlling your house?s supply.

Your main water valves are near your curb and under a cement lid that has a tiny hole in it. This hole allows utility people to get the lid off with a hooked rod, but using a finger is okay.

If you live in the countryside, look for a special location or well. Find out where they are before starting.

When the water is off, there is only a tiny spillage amount from leftover water and, in the case of kitchen sinks, some cooking leftovers, within your pipes and hoses. Clear the area under your sink first, put some towels down, and keep a pan at the ready.

Next, look for nuts, screw-like clamps or tintype clamps, like the ones you find in your car?s radiator. These connectors have to be undone.

Make sure your hoses and valves are in good condition and if need be, replace them. Get all your supplies and some plumbers tape.

In some instances, old valves will need cutting off with either a tiny torch or hacksaw. You may also find that these old valves have been welded on, and if so, get threaded-type replacements. However, leave plenty of piping left for rethreading. If need be, get a plumber.

Few year old hoses and valves may have a build-up of calcium carbonate. It is a chalk-like substance on shower and bathroom.

If things stick, pry them loose with some quick turns. However, be careful not to loosen or break pipes, as you may have to replace or reseal them. Both ways are not pleasant, as breaks do not always occur in accessible locations. Then, when you have taken out everything, use fine sandpaper or steel wool to clean any surfaces.

The next step is easy enough, but tricky. Cover the smooth, threaded areas where your hoses and valves with plumbers tape, a few layers will do. Most importantly, always be sure to have the tape threaded in the turning direction of the hose or valve. Tightening the tape when you screw on the hose or valve is a good idea.

Then get the valve screwed on, the hose attached and the clamps tightened, but not too tight. Everything should be snug.

Test the valve slowly, making two turns, and check for leakage. If done properly, the tape and threads will prevent leaks.

Whatever happens, do not give into frustration; just restart if the job fails and try again. Thankfully, you should not have to go through this again for at least a few years.

Robert Carlton published first and foremost for http://www.kitchen-cabinets-tips.com , a website on the topic of home improvement . You can come across his writings on kitchen sinks and cooking on his site.

Plumbing-when To Do It

We all know the story of the homeowner who tried his own plumbing repairs and ended up paying more since the plumber had to fix the repairs. Recognizing when the job is too big or too complicated for the ordinary homeowner is not easy-handyman egos are too easily bruised. However, plumbers are notoriously expensive so you want to make sure you really need one before you call him. There are a number of things you can do to make sure you will keep your costs of plumbing repairs at a minimum.

First of all, don't compare the prices of plumbers based solely upon their rates. Make sure you know all of the costs involved. One plumber may have lower advertised rates, but charge mileage which will increase the price of the job. Some plumbers start the clock when they get to your house, others may start it as soon as they leave their shop. Find out if they charge by the quarter hour; if they charge by the hour, you may have to pay for a full additional hour even though the job only went a few minutes over. Make sure you are fully aware of the real rates, so that you are comparing apples to apples. Another good idea is to ask around with friends and families for a reputable plumber instead of relying on advertisements.

Keep your plumbing jobs down altogether by taking good care of your plumbing. Most plumbing emergencies are caused by backups. Avoid having items such as grease or hair, which are responsible for most clogs, go into your drains. Putting vinegar, followed by boiling hot water down the drain is said to cut through grease clogs. Use a mesh catch in all of your drains to catch hair and avoid it going down the drains. Use a drain cleaning product once a month to keep the drains clean.

If you do hire a plumber to install a fixture, save money by buying your own fixtures. A plumber will add a premium to any fixtures he has to obtain for you. Just make sure you agree upon the type of fixtures you will use. Some plumbers won't guarantee certain cheaper brands.

If you keep all of your plumbing fixtures properly maintained, you can almost eliminate the need for a plumber. Make sure fixtures are attached properly and tightened. If you do call a plumber, make sure you know exactly what the problem is so the plumber can fix it and get out; don't forget he charges by the hour so you don't want to spend precious time discussing the problem. Keep a list of plumbing problems, so that if you have to call a plumber for one thing, you can have him fix everything in the same visit.

Focusing recent findings in truck tool storage, Ray Walberg published predominantly for http://www.insidewoodworking.com . His abstracts on kennedy tool boxes can be found on http://www.insidewoodworking.com/boxess

Plumbing Supplies Wanted

We have registered with the Pa Dept. of Environmental Resources as a place where you can drop off your unwanted items such as old tools, tractors, plumbing and construction supplies, farm implements, fencing materials, usable nuts and bolts.... well you have the picture, things we can use around our farms. If we can't use them maybe we can send it on to someone else that can???? We are always looking to trade nursery stock and seedlings for your surplus. Email us with your surplus materials. We may be able to make trades.

I once put an ad in the paper that said, "If it's free it's for me". I had to stop the add because I collected so much stuff. Ads do work. The problem with this ad was it was not specific enough to target what I was looking for. Over time and years I then started to swap and barter the free stuff that I got for things I really wanted. I had hundreds of broken lawn mowers and hundreds of gallons of old unwanted paint. I had enough paint to dip a house if needed. Disposal now became an issue. Thus I came up with the idea of trading and barter. Now I did not invent this wheel but I had enough of them that it appeared I might have. So barter has become a means of swapping and exchanging my surpluses for other people's surpluses. Since I am in the nursery business I also have plants that are surplus. I may plant 1000 trees expecting to need 1000 and find that I have 500 more than what I need. So offering these trees on the web for barter has been an effective means to move dormant inventory. Besides this is a great way to meet new customers. When they have surpluses and I can move their dormant stock, we both win. Here is a sample ad that I ran on my web site seedlingsrus.com :

Trades Wanted

We are always looking to trade nursery stock and seedlings for your surplus. Email us with your surplus materials. We may be able to make trades. Construction materials and equipment...doors, windows, boards, hardware Plumbing supplies...pvc pipe and fittings, pumps, heaters, copper pipes and fittings Hunting and fishing gear...ammo, reels, rods, tackle, boats, canoes, paddles and yes...even snakes..... .

Hand tools...saws, drills, hand power tools, blades cutters hammers, wrenches, tool boxes Farm implements...out door power equipment, tractors, wagons, fertilizers, pesticides, used cans of oils and lubs Farm supplies...shovels, rakes, farm bells, an anvil, blacksmithing tools, generators Fencing materials such as woven wire and split rail fencing, fence chargers, barbed wire, wire, nails, nuts, bolts, surplus pavers, Palletized stone, field stone,flagstones, rocks,boulders Household items such as wooden furniture, tables chairs, cabinets and dressers Livestock..pigs, goats, cows, donkeys, chickens, peacocks, sorry no sheep(I don't trust myself with them).

These adds are not what GM of Ford would use...but they are going broke!!!!

Bill Hirst has been growing plants on his 200 acre farm in Bucks County for 30 years. His web sites are http://www.seedlingsrus.com and http://www.digatree.com Sign up for Bill's newsletter at http://www.seedlingsrus.com/123456signup.html

Plumbing Help: How to Avoid Burns at Home When Setting The Water Temperature

Sometimes it seems like your shower or sinks are too hot, or not hot enough.

But raising the temperature valve on your water heater can be dangerous or a waste of energy. If there are children, elderly, or disabled persons in your household, for example, you might not want to set the thermostat above 120 degrees Fahrenheit to avoid contact with ?hot? water.

The following chart may help you determine the right temperature for your water heater. According to Shriners Burn Institute:

- Water set to 125 degrees generally takes about 1.5 to 2 minutes to scald.

- Water set to 130 degrees generally takes about 30 seconds to scald.

- Water set to 135 degrees generally takes about 10 seconds to scald.

- Water set to 140 degrees generally takes about 5 seconds to scald.

- Water set to 145 degrees generally takes about 3 seconds to scald.

- Water set to 150 degrees generally takes about 1.5 seconds to scald.

- Water set to 155 degrees generally takes about 1 second to scald.

So you can see how small increases in temperature can have a large effect on scald times.

People are often concerned about raising the temperature on their water valves due to a bacteria known as Legionella (and the disease known as Legionella's disease) that thrives in water at a temperature of 105 to 115 degrees.

Since this bacteria cannot survive above a temperature of 131 degrees people often look to exceed that temperature despite the risk of scalds.

Fortunately, the solution is a simple one. A device known as a water mixer allows your water to be heated to a point that will kill off all harmful bacteria, but sets a different max temperature to water being distributed to your tap water in sinks and showers.

A plumber can install this device for you quickly and without great expense!

Donald Koen is a master plumber and owner of Koen Plumbing, a Dallas Plumbing Company since 1946. If you're looking for a Dallas Plumber, Donald can offer expert assistance through his website www.KoenPlumbing.com

Plumbing Help: How to Avoid Burns When Setting Your Water Temperature

Sometimes it seems like your shower or sinks are too hot, or not hot enough.

But raising the temperature valve on your water heater can be dangerous or a waste of energy. If there are children, elderly, or disabled persons in your household, for example, you might not want to set the thermostat above 120 degrees Fahrenheit to avoid contact with "hot" water.

The following chart may help you determine the right temperature for your water heater. According to Shriners Burn Institute:

- Water set to 125 degrees generally takes about 1.5 to 2 minutes to scald.
- Water set to 130 degrees generally takes about 30 seconds to scald.
- Water set to 135 degrees generally takes about 10 seconds to scald.
- Water set to 140 degrees generally takes about 5 seconds to scald.
- Water set to 145 degrees generally takes about 3 seconds to scald.
- Water set to 150 degrees generally takes about 1.5 seconds to scald.
- Water set to 155 degrees generally takes about 1 second to scald.

So you can see how small increases in temperature can have a large effect on scald times.

People are often concerned about raising the temperature on their water valves due to a bacteria known as Legionella (and the disease known as Legionella's disease) that thrives in water at a temperature of 105 to 115 degrees.

Since this bacteria cannot survive above a temperature of 131 degrees people often look to exceed that temperature despite the risk of scalds.

Fortunately, the solution is a simple one. A device known as a water mixer allows your water to be heated to a point that will kill off all harmful bacteria, but sets a different max temperature to water being distributed to your tap water in sinks and showers.

A plumber can install this device for you quickly and without great expense!

Donald Koen is a master plumber and owner of Koen Plumbing, a Dallas Plumbing Company since 1946. If you're looking for a Dallas Plumber, Donald can offer expert assistance through his website http://www.KoenPlumbing.com

Finding The Plumbing Fixture That Works In Your Home

There can be nothing more enjoyable than decorating your home. Whether it?s tackling the design of a new home, or revamping your existing home, choosing just the right accessories to complete the look of your home can be decidedly challenging and exciting. Nothing can do more for a room than a beautiful plumbing fixture. And finding that plumbing fixture can be a journey in and of itself.

To begin with it?s important to take the overall feel of your home into account. A shiny new plumbing fixture with contemporary lines or a sleek modern feel may look out of place in an older, more traditional home. Conversely, an antique plumbing fixture may not blend in a more contemporary home.

When in search for newer, more modern plumbing fixtures look to materials such as nickel and chrome. These plumbing fixtures are readily available in most home improvement stores today, making them a convenient purchase. Prices ranges are enormous. You can just as easily find over the top expensive plumbing fixtures as you can find those that are affordable.

Locating antique plumbing fixtures to fit the style of your older home can be a little more work but also quite a bit of fun. Start with antique stores, make the rounds of flea markets, estate sales, and even try your hand at ebay. You can find a treasure in the rough that can become a plumbing fixture showpiece in your home.

Even with antique plumbing fixtures, prices vary greatly. However, in many cases you can bargain with sellers to get a better deal.

Finding that perfect plumbing fixture can create a whole atmosphere in a room of your home. Whether it?s new or antique, the plumbing fixture that you choose must be one that you love no matter its origin.

For easy to understand, in depth information about plumbing visit our ezGuide 2 Plumbing.

Bathroom Plumbing Fixtures - It's All in Design

There is more to bathroom plumbing fixtures than meets the eye. Take for example the wide ranges in finishes - chrome, copper, gold, brass, nickel, and more; or the varieties in design - traditional to minimalist.

In the bathroom, consumers have access to a vast array of finishes and design options through manufacturers such as Sigma, Perrin & Rowe, Sussman, and Porcher. Take for example Sigma faucets and basins, which come in literally dozens of finishes. One particular finish, called "the living finish", oxidizes and changes with use, creating a dynamic yet rustic look. Other Sigma finishes include matte, gloss, and polished finishes in everything from chrome to gold.

Sigma, along with Perrin & Rowe, offers a wonderful selection of traditional faucets and basins that vary from traditional English style plumbing to a Greco-roman look in a vast array of available finishes.

For those seeking simplicity, Porcher, featured on FinestFixtures, has a line of products offering some of the latest in European minimalist design by leading designers such as Gae Aulenti (Monoblock Faucet) and Enzo Mari (Angular Ceramic Sinks). Minimalism involves stripping away the frivolous and unnecessary, leaving clean and simple lines, but without sacrificing luxury and style. Basins by Art Ceram and KWC faucets also offer bathroom and kitchen designs to those seeking simplicity - take for example the KWC faucet "Eve", which was featured in Time Magazine in October 2006.

Toilet manufacturers have made leaps and bounds in delivering products offering easier maintenance and greener more environmentally friendly designs. Toto and Porcher both offer lines of sleek dual flush toilets imported from Europe and Japan, which dramatically reduce water consumption without sacrificing functionality. Toto boasts the world's most expensive toilets, with seat options that include a remote warm water wash and dry feature for huge savings on your toilet roll consumption.

President of www.finestfixtures.com, an e-commerce website specializing in the delivery of bathroom vanities and other fixtures, Glen Albert Phillips was trained with a masters in business administration (MBA) at HEC Montreal and ESADE Bracelona. With Coordinated Kitchen and Bath and Colours By Paula, he has completed a number of collective construction projects in the residential re

Getting A New Plumbing Installation

Changing the look of a house can mean many things. A plumbing installation can be the answer for a new home under construction or offered as a replacement to an installation that?s no longer viable. Either way, a plumbing installation that?s done well can instantly change the look and feel of a room ? and a home in general.

For those who are building a new home, a plumbing installation may be just one of the myriad of choices that the homeowner must make. Sinks, showers, bathtubs, and the like will all need to be decided upon. The choices are often made by taking into account the overall feel of the home and choosing products that fit seamlessly into that atmosphere.

For those who are performing upgrades on an already existing home, a plumbing installation may mean the replacement of an existing installation that no longer fits the environment of the home. Swapping out plumbing installations can change the look of a room enormously and give new life to a home.

While a plumbing installation can certainly be tackled by a confident do-it-yourselfer, most often they are left to the professionals. While a plumbing installation performed by a homeowner may be completed successfully, there may arise problems down the road.

Therefore, in some cases ? when a homeowner is adequately experienced in plumbing installations - it?s best to use a professional plumber. Then, if there?s an issue in the future, the plumber can attend to it. Additionally, the materials used by the plumber should be guaranteed; something you?re not likely to get if you perform the plumbing installation on your own.

Whether it?s done by a professional or an self-assured homeowner, a plumbing installation can be worth the time and money it will cost. The reward will be a beautiful room ? and home ? that matches your personal and unique ideas of perfection.

For easy to understand, in depth information about plumbing visit our ezGuide 2 Plumbing

DIY Plumbing Repair: Finding Out How to Do the Job

When you have plumbing problems, and need to get the plumbing fixed, you need DIY plumbing repair. However, if repairing your plumbing is not something that you know how to do yourself, you might be wondering how you can learn this. There are many places that you can learn how to fix your plumbing problems yourself and you will not have to rely on a contractor to come and do this job for you. More and more people everyday are starting to do their own DIY repairs from plumbing to everything else that might need it. But not everyone knows how to go about doing this. There are several places below that will be great for learning how to DIY.

1. Library

Going to your local library and looking for books that show you how to DIY plumbing repair will be a great big resource when you are learning DIY plumbing repair. You will find that there are many books on this subject at your local library, and you will be able to check them out and take them home to study them. When you study them, be sure that you take notes, especially on any problems that the books say you might encounter. This will ensure that you can get your plumbing fixed with little hassles, and you will have running water again in no time.

2. Online

Searching online for DIY plumbing repair will bring you to many places that you will be able to read up on fixing your plumbing problems. You will see that there are many website that explain this job in great detail, and then getting it done will be a breeze for you once you have read over the how tos that you find online. You might even come across an email address so that you can ask questions to the expert that is giving advice as well.

3. Plumber

Asking an experienced plumber about DIY plumbing repair is a great way to find the information that you need for doing this job yourself. Most plumbers are straight up about any problems that you might have, and you might even run a across a plumber that will walk and talk you through the process. If you have a good friend that is a plumber, ask him if he will come over and tell you what you need to do to fix the problem yourself. You will see that any plumber friend that you might have will be more than willing to help you learn the ropes of keeping up your own plumbing.

As you can see, there are many places that you can go to learn how to DIY plumbing repair. You will find that the picturers you find in the library books will make the instructions seem easier, and if you happen to have a plumber friend, well that is the way to go for the easiest DIY job that you can do.

Carl has been a professional plumber in a company he owns for more than 10 years not only is he experience in unclogging just about anything but also an expert in installing plumbing fixtures and installing new water lines. Carl will give you some helpful tips on diy plumbing when you visit http://www.alliedesolutions.com

Mold in the Kitchen can be the Result of Plumbing Problems

Some people believe that mold is a basement problem or possibly it will appear on an outer wall. The facts are mold is not that choosey, it will happily develop anywhere the conditions are right. Leaky plumbing will make the inner part of the lower cupboards moist. The wet wood is exactly the kind of base for fungus to grow on. There are molds that will grow on wood, ceiling tiles, wallpaper, paints, carpet, sheet rock, and insulation. Mold spore are everywhere just waiting to grow. There is no real way to get rid of all mold and mold spores from your home. The only way to control mold growth is to control the moisture level in your home.

There are many pieces of plumbing in the kitchen that can spring a leak. Either the supply lines or the drain lines can erode and begin to weep then drip and finally run. Often these growing problems go unnoticed until the last stage. Longstanding moisture from the weeping and dripping is all the water necessary to provide the growth conditions. Now do not get in a panic if you have a pipe spring a leak and you catch it in a week or so. It is very unlikely that this would be long enough to establish a mold culture.

When you find a leak there are a few basic steps to follow. First close the water supply valve to the area. There is probably a zone shut-off valve or for that area of your home. If the valve does not stop the water close the main water valve for the house Now mop up the water and dry out the area, maybe use a fan if there is a lot of moisture. Now address the leaky item. If the faulty part is a faucet or a supply riser line, you will be able to replace it yourself. However if it is one of the soldered in pipes, you may be well advised to hire a plumber to replace it. Often amateurs will create more problems when trying to solder new pieces into old pipe systems.

Some repairs are easier to do than others are. Many just take time and some are a major hassle. Particularly difficult are those that involve working on pipes that are hidden behind walls or under floors. If in doubt wire a professional. If a small section of a line springs a leak, it is likely that the whole pipe needs replacement. Fix all plumbing problems immediately it is best for the home.

If you keep on top of moisture problems and run your kitchen fan whenever cooking causes steam, you should never have a mold problem in your kitchen. This not only saves you money but more important, it is healthier for you and your family.

Jim Stewart has been involved with home construction and improvement for over 40 years as a tradesman, contractor and site supervisor and has seen the entire spectrum of home improvement. Jim is a student of the industry and gladly passes on what he has learned. Jim is now the also the publisher of http://www.best-kitchens.com/ and http://www.Basement-Central.com/

Jim can be contacted at Homes42005@yahoo.com

Planning Your Plumbing Projects Carefully Before Starting

If you are planning to take on a home improvement project, the plumbing involved is probably something that is causing you to worry. Whenever you make major alterations to a property plumbing is usually involved and needs to be done properly. It is easy to gloss over the importance of plumbing in your home improvement projects, making sure it is done well can save you time, money and stress in the long run.

You should consider where plumbing will be involved in your project before you start and make sure you plan for it in advance. Usually home improvements that involve a kitchen or bathroom will involve a degree of plumbing work. Depending on the scope you may feel capable of tackling the project yourself, or you may want to play it safe and employ a professional. You should get a quote and ensure your plumber is available before you begin your project.

Plumbing is an area that most homeowners are not shy about admitting they don’t have a clue about. Many avoid the issue, being happy to pay someone else to tackle the problem for them, but there is actually a surprising amount the homeowner can do for themselves. There are whole range of books and websites available with diagrams and detailed instructions to guide you through simple or even fairly complicated plumbing tasks. The types of tasks that can easily be undertaken using an online plumbing guide or handbook include installing a new faucet or drain tap. If you want to replace long lengths of pipe, on the other hand, you may be best to find someone with plumbing experience. Perhaps you have a friend who would be willing to help out which will reduce the overall cost of your home improvement project.

Producing a detailed plan with timelines for your project and the plumbing activities involved, will help you to identify what you can do yourself and what you need to involve a professional to help out with. Your time line will be a good way to keep track of what needs to be done, how it will be done, and by whom.

Plumbing activities can involve anything from replacing a faucet to installing new pipes and most tasks are not as tricky as you may have been led to believe, as long as you have the correct information coupled with the confidence to do them properly. Thorough research on the tasks required will let you make an informed decision whether you can tackle the job yourself. Although not always difficult, plumbing does take a great deal of time so if feel you wouldn’t have the patience then your best option is to call in a professional.

Some people may find little reward in plumbing as no one can see the results of your efforts, but good quality plumbing will allow your home to function well without leaks or endless repairs. For those that feel comfortable trying their hand at plumbing, they may find it easier than they expect. For those that don’t there is no shame in calling the plumber!

Concentrating on latest developments in kitchen cabinet, he writes articles mainly for http://www.kitchen-cabinets-tips.com. From his detailed publications such as http://www.kitchen-cabinets-tips.com/faucets.html, the author established his skill on topics associated with kitchen faucets and countertops.