Plumber And Plumbing



             


Monday, March 31, 2008

Repair Your Plumbing? You Can Do That!

Not to long ago my water heater went out. Just like that you think all is well then whamo a small leak appears. I was faced with a decision, fix it myself or call the plumber. Well after getting several estimates ranging from $1500 to $2500, I decided to do it myself.

It's really not that to hard to repair plumbing. In this article I will give you some pointers to help aid you in this endeavor. And hopefully spare you from the high cost of paying for a plumber. Nothing against plumbers but this project is doable.

Steps it will take:

1) As soon as you realize that the old water heater has to go start draining it. It can take several hours to drain. Remember to turn off the main water valve and open up all of the faucets to eliminate any pressure. if it's a gas unit make sure that you turn off the main gas line in the house and if it is electric turn off the breaker. Think safety first.

2) Try and purchase the same unit. This will prevent you from adding pipe and new valves.

3) Size up the job and disconnect the tank from the water pipes, gas line or the electrical connection. If it's gas you will need to disconnect the flue as well. Save all parts in order to match them up when you purchase your supplies.

4) You will need to have on hand plumbers tape, small gas torch, solder, flux, plumbing sandpaper, pipe cutter, gas tape (to seal gas line) and maybe some pipe glue. Ask the sales person at the hardware store for a more defined list.

Once you have disconnected the tank remove it from your work space. Do a thorough measurement of the remaining pipe for reference when you go to the hardware store. I will be honest with you, you might need to make a few trips back to the store. Once you get the new tank, slide it into place to line up the plumbing.

If you bought the same unit it should line right up, if you were unable, you will need to remove or add length to the existing piping. This may require you to splice together copper with plastic, don't let this scare you the hardware store will have all of the necessary parts.

If you need to add copper pipe make sure that you clean the old and new pipe by using sandpaper, inside and out. If it's not clean the solder will not flow into the joint. Another tip is to not over wrap the mail threaded pipe with tape, this can cause a leak. Twice around should be enough. Also, don't over tighten it.

This may sound complicated but trust me, if I can do it, anyone can. Just take it slow, ask questions from the hardware specialist and go online for more instructions. One last item, if you have a gas unit your county or city may require an inspection. The inspector will verify that the gas connection is right and that the angle of the flue is right. Don't take a chance with gas, make the call to have someone come out and inspect your work.

Your should be able to complete this job for $500 or so and the tools and supplies will be available for when your dishwasher goes out. Good luck.

Dennis Watson - Just helping others succeed.

Zeoh.com Free Classifieds Web Site =>http://www.zeoh.com/

You Can Do That - Blog =>http://www.you-can-do-that.blogspot.com

Labels: , , , , ,

Monday, March 17, 2008

Your Home Project ? Educating Yourself On Plumber Rates

As any homeowner will attest, calling in a plumber is usually done when there remains little other choice. A thrifty do-it-yourselfer will often try to fix the offending leak, flood, or jiggle in an effort to save money. But when a truly complicated problem arises or the effort at self-plumbing proves fruitless, it becomes necessary to call in the experts. And, subsequently, it becomes necessary to quickly and thoroughly educate yourself on the most current plumber rates.

Jumping headfirst into hiring the first plumber you come across in the yellow pages could easily yield disastrous results. Taking the extra steps to research plumber rates will put you in control of your situation; you?ll know what to expect and therefore know what to seek out in terms of reputable plumbers.

When researching plumber rates there are a variety of sources towards which to turn. The Internet, as always, is a valuable source of information on a variety of topics. Simply do a search for plumber rates in your area and you?ll quickly learn the lay of the land. Further, there are often chat forums where you can access customers who have likely been in your situation at one time or another. Additionally, you can often speak with professional plumbers themselves to learn the current plumber rates for a reputable service.

However, the most invaluable source for learning plumber rates in your area is the people with whom you share a community. Turn to your neighbors, friends, and friends of friends to find the most reputable and trustworthy plumbers in your area. This will also grant you the most up-to-date information about plumber rates.

One important thing to keep in mind is that low plumber rates may not always save you money in the end. More experienced plumbers will often charge plumber rates that match their level of experience. Trying to cut corners by hiring a plumber based solely on their low plumber rates may result in more trouble than it?s worth. A cheaply priced plumber may undercut his competition but there may be a reason for his prices.

However, when hiring an experienced, reputable plumber you can often bring prices down by offering to supply materials yourself. In this way, you are paying only for labor. Keep in mind, however, that there?s risk associated with this as flawed materials will not be guaranteed by the hired plumber.

Ultimately, it may make the most sense to find the best plumber you can find and pay the associated plumber rates. As is often the case, you get what you pay for. So choose wisely.

For easy to understand, in depth information about plumbing visit our ezGuide 2 Plumbing

Labels: , , , , ,

Thursday, November 29, 2007

How to Tackle a Leaking Tap without a Plumber

It’s nice when the man of the house is a jack of all trades. Knowing a little carpentry, knowing about electrical issues, and being able to perform a little plumbing is a great asset. However, some men aren’t as handy as others, and a plumbing problem such as a tap leak can send you running straight for the telephone to call a plumber.

Having a leaking tap is very terrible! What if all the plumbers were out for a vacation during summer? Would you wait for the next season before your leaking problems be fixed? Of course not, and the bottom line is that you could probably handle this yourself regardless. Maybe it’s time to put down the phone and learn a little bit about handling the small jobs yourself.

If you have never experienced fixing a leaking tap your whole life, this is the perfect time to practice. Remember to be patient, especially if this is your first time doing this. You can’t expect to transform into a plumber at the drop of a hat.

If you don’t have a clue on how to fix a leaking tap, look for old books in your house. There might be some easy and quick steps on how to fix it yourself. It would be better to look for the pages with illustrations in it so you can go through it properly and follow the procedures at once.

Here are some simple steps that might help you fix that leak. You need to have some equipment such as screw drivers or wrenches. You will also need a new washer to replace the old one. Patience is the last thing that you need in order to successfully manage that leaking tap.

First, find a shirt that is not your favorite. Of course plumbing is not a very clean process so you should wear a shirt that is used only at home. Find something that is comfortable. Be ready to face dirt and all slime and indulge in a bath later.

Now, turn off the main cork. Be ready to get things started. Next, you should take a spanner and uncork the top of the tap. If you have finished removing it, remove the damaged or the broken washer and replace it with a new one. The replacement you will be using should be durable and with high quality. Now you can cover it again and you should tighten it with a spanner so that it will not leak again.

Now your job is already done and it was fun and easy right? Now, if that tap leaks again, you can easily do it next time without the help of the plumber.

Jo Williams has an interest in Home & Garden and Leaking Tap, for more FREE information and articles please visit Leaking Tap Resources

Labels: , , , , , ,